首钢转炉一次除尘尘泥生产转炉冷却造渣剂应用研究.pdfVIP

首钢转炉一次除尘尘泥生产转炉冷却造渣剂应用研究 ·1 · 首钢转炉一次除尘尘泥生产转炉冷却造渣剂应用研究 武国平 （北京首钢国际工程技术有限公司, 北京 100043 ） 摘 要 转炉炼钢一次除尘采用 LT 干法方式产生的除尘灰或 OG 湿法除尘方式产生的污泥，具有粒度细、含铁量 高的特点，是可回收的二次资源。介绍了首钢迁钢公司和首钢京唐公司分别采用烧结工艺和冷固球团工艺，通过原 料分析、配料计算，使用转炉炼钢尘泥生产出符合转炉使用要求的造渣剂，经炼钢厂使用证明烧结矿和冷固球团均 具有很好的化渣效果。处理炼钢尘泥的两种工艺流程可为炼钢厂产生很好的经济效益和环境效益。分析表明，冷固 球团工艺是钢铁企业高效回收利用转炉尘泥的发展方向。 关键词 转炉一次除尘，烧结，尘泥，造渣剂，冷固球团 Application Rresearch of Producing Coolant and Slag Former Using Dust and Sludge of Shougang Converter Primary Dedust Wu Guoping (Beijing Shougang International Engineering Technology Co.,Ltd., Beijing 100043, China) Abstract The primary dust which is generated by dry de-dusting of converter gas or sludge which is generated by OG wet de-dusting ，with the characteristics of fine particle size, high iron content ，is a recyclable secondary resource.This paper describes the sintering process of Shougang Qianan Iron Steel Corporation and cold-hardended pellet process of Jingtang company, through the analysis of the raw materials and charge calculation, using dust and sludge of coverter primary dedust produced slag former which meet the requirements of converter. Using slag former in converter show that the sinter and cold-hardened pellets have good effect on slag formation. Two kinds of process for treatment of dust and sludge of coverter primary dedusting can produce good economic and environmental benefits for the steel plant. The analysis shows that the technology of cold-hardended pellet is the development direction of high efficiency of iron and steel enterprises to r