姓名——浅谈船舶管系放样工艺设计.doc

高等教育自学考试 毕业设计（论文） 题目 浅谈船舶管系放样工艺设计 专业班级 姓名 罗灵娇 指导教师姓名、职称 所属助学单位 年 月 日 目录 摘要 3 Abstract 4 1 绪论 5 1.1 管系放样的目的 5 1.2 “管系放样”的原理 5 1.3 本文的研究内容 5 2 压载水系统的设计与分析 5 2.1 压载泵的排量和排出压力 6 2.2 压载水管路口径的计算 7 2.3 压载水管路管材和附件的选择 7 2.4 根据管子施工零件图进行弯管工作 8 2.5 法兰连接 11 2.6 管子的表面处理 11 2.7 管系的油漆 12 2.8 钢管的焊接 15 2.9 管路的紧密性试验 16 结论 16 致谢 16 参考文献 17 摘要 随着集装箱船舶的发展，船舶国际公约的修订和船级社规范的更新，船舶动力装置中的船舶管系的设计面临更高的要求。深入研究和分析船舶管系，对提高船舶管系的设计和优化具有实际指导意义。 船舶的设计分为三个阶段：初步设计阶段、详细设计阶段和生产设计阶段。本文所探讨的内容属于详细设计阶段，对3300TEU集装箱船船舶管系的整体设计起着承上启下的关键作用，既要完全体现基本设计阶段所确定的基本内容，又要很好的为生产设计阶段做好铺垫。对3300TEU集装箱船船舶管系的研究和分析，在详细设计层面为此类船舶的管系设计提供了参考模版，具有一定的指导意义。船舶管系是为全船服务的管路系统，全船所有管路组成的系统，用于流通液体，燃油，淡水，冷却水，或者一些气体Abstract With the development of the container ship, the updated revision of the ship of international conventions and classification societies norms, the ship in the ship power plant piping design facing higher requirements. In-depth research and analysis of the piping system, ship piping design and optimization of practical guiding significance. The ship design is divided into three stages: the stage of preliminary design, detailed design stage and production design stage. This paper discusses the contents belong to the detailed design stage, 3300TEU the overall design of the container ship of the piping system plays a key role nexus, it is necessary to fully reflect the basic design stage to determine the basic content, but also good for the production design stage good bedding. The 3300TEU research and analysis of container ships ship piping, the piping design of such vessels in the detailed design level to provide a reference template, with some guiding significance. The piping system is a piping system of services for the whole ship, the whole ship piping system for the flow of liquid fuel, fresh water, cooling water, or some gas. To include a system of ballast water, bilge water systems, fire systems, ventilation soundi