梯形水坝的有限元分析.docVIP

一 题目 下图为一梯形水坝，载荷沿厚度均匀分布，其尺寸如图所示，厚度t=1m,弹性模量E=79G,泊松μ=0.3，容重ρ=3200. 二 划分单元及载荷处理 三 输入数据 1.基本参数 ⑴ 单元数 NE=40; ⑵ 节点数 NJ=30; ⑶ 支撑数 NZ=14; ⑷ 节点载荷数 NPJ=7; ⑸ 半宽带 DD=14； ⑹ 节点位移数 NJ2=NJ*2=60; 2.其他参数 ⑴ 问题类型码LXM,LXM= ⑵ 弹性常数E,弹性模量EO=79，泊松比μ, MU=0.3; ⑶ 容重ρ ,LOU=3200; ⑷ 板厚t,TE=1; ⑸ 节点坐标数组AJZ. AJZ(NJ,2)= AJZ(NJ,2)中的元素按节点整体码顺序输入，数组行号为节点整体码，每个节点的坐标值存一行，第一列存x 的值.如=AJZ(2,1) =AJZ(4,2). ⑹ 节点码数组JM JM(NE,3)= JM（NE,3）中的元素按单元输入。单元号为行号，每个单元的整体码存一行，局部码为列号，局部码对应的整体码存放在相应的列。 ⑺ 支撑数组NZC. NZC(NZ)= NZC(NZ)中的元素按支撑对应的位移数从小到大排列。 ⑻ 节点载荷数组PJ PJ(NPJ+1,2+1)= PJ(NPJ,2)中的元素排列原则为：一个节点载荷存一行，同一行中第一列是节点载荷值，第二列是载荷对应的位移数。 四 程序及结果 #includestdio.h #includemath.h #define NE 40 #define NJ 30 #define NZ 10 #define NPJ 7 #define NJ2 60 #define DD 14 int LXM=1; double EO=79000000000; double MU=0.3; double LOU=3200; double TE=1.0; //节点坐标数组 double AJZ[NJ+1][3]={{0,0,0},{0,0,0},{0,1.5,0},{0,3,0},{0,4.5,0},{0,6,0},\ {0,0,1.5},{0,1.5,1.5},{0,3,1.5},{0,4.5,1.5},{0,5.25,1.5},{0,0,3},{0,1.5,3},\ {0,3,3},{0,4.5,3},{0,4.85,3},{0,0,4.5},{0,1.5,4.5},{0,3,4.5},{0,4.5,4.5},\ {0,0,6},{0,1.5,6},{0,3,6},{0,4.275,6},{0,0,7.5},{0,1.5,7.5},{0,3,7.5},\ {0,3.75,7.5},{0,0,9},{0,1.5,9},{0,3,9}}; //单元节点码数组 int JM[NE+1][4]={{0,0,0,0},{0,1,7,6},{0,1,2,7},{0,2,8,7},{0,2,3,8},{0,3,9,8},\ {0,3,4,9},{0,4,10,9},{0,4,5,10},{0,6,12,11},{0,6,7,12},{0,7,13,12},{0,7,8,13},\ {0,8,14,13},{0,8,9,14},{0,9,15,14},{0,9,10,15},{0,11,17,16},{0,11,12,17},\ {0,12,18,17},{0,12,13,18},{0,13,19,18},{0,13,14,19},{0,14,15,19},{0,16,21,20},\ {0,16,17,21},{0,17,22,21},{0,17,18,22},{0,18,23,22},{0,18,19,23},{0,20,25,24},\ {0,20,21,25},{0,21,26,25},{0,21,22,26},{0,22,27,26},{0,22,23,27},{0,24,29,28},\ {0,24,25,29},{0,25,30,29},{0,25,26,30},{0,26,27,30}}; int NZC[NZ+1]={0,1,2,3,4,5,6,7,8,9,10}; double PJ[NPJ+1][2+1]={{0,0,0},{0,207637.5,1},{0,339937.5,11},{0,229687.5,21}, {0,141487.5,31},{0,75337.5,41},{0,31237.5,47},{0,4900,55}}; double AE,KZ[NJ2+1][DD+1],P[NJ2+1],S[3+1][6+1],KE[6+1][6+1]; int IE,JE,ME; void DUGD(int,int); void main() { int NJ1,k,IN,IM,jn,m,i,j,z,