船舶电站系统的配置及维护.doc

专科毕业设计（论文） 设计题目： 船舶电站系统的配置及维护 系 部： 电气工程系 专 业： 船舶电气 班 级： 船舶电气052501 姓 名： 学 号： 指导教师： 职 称： 实验师 2010年6月 南京 摘要为使船舶在各种不同工况下合理地进行供电日常维护和管理；；；A Ship Power is a plant which generators and continuously supplies electric power to various auxiliary machinery onboard and meets the electric power demands of the whole ship.Normally，A Ship Power consists of a prime mover，generators and their ancillary equipment(to form generators sets) and distribution boards，being an essential part of the power system on board a ship. A Ship Power is one of the important equipment on board of modern ships，as the performance of the station will influences directly the operation conditions of a ship. To make the ship can be powered reasonably in a variety of conditions, so, the configuration of power should be analyzed and capacity of power should be calculated in first. The Typical fault of a Ship Power is also been analyzed and rational and effective solution is also being given. For the daily maintenance of the Ship Power, the necessary exposition is also being given in this paper. As the ship to the large-scale, automated direction, ship power plant automation is also rising, and towards the high reliability intelligent direction. With the automation of ships the continuous improvement of ship power stations development goals is to automate the research and development into unmanned ship level, and to ensure that electrical and mechanical equipment in the best run state in the event of anomalies the ability to detect and exclude failure Keywords Ship Power; Capacity Calculation; Capacity Calculation; Routine maintenance 目 录 1 引言 1 2 船舶电站基本定义及配置 1 2.1船舶电站概述及分类 1 2.2现代大型船舶电站的常见形式 2 2.3电站容量及配置 4 3 船舶电站系统的典型故障分析 5 3.1