毕业论文（设计）减速器箱体零件的工艺工装设计.docVIP

减速器箱体零件的工艺工装设计 摘 要：本设计是针对减速器箱体工艺的制作，主要研究的是减速器箱体零件的工艺过程、减速器的底座的工艺过程、减速器箱体合装后的工艺过程以及对该技术的测试和其实用性的研究。并由此做出了对现行的减速器的箱体的改造和进一步的完善。在这次的箱体工艺制造中，对一些主要程序比如说结合面联接孔、钻顶面螺纹底孔、攻螺纹、钻侧面测油孔、放油孔、螺纹底孔、沉孔、攻螺纹 等的研究。 关键词：工艺规程，切削用量，夹具 Process Equipment Design gear unit housing parts Abstract：The design is made according to the speed reducer box technology, mainly studies the process, single reduction gear box reducer base process, reducer is the process and the technology test and the practicability of the research. And thus made the transformation to the current speed reducer box body and further improve. In the m