基于规则化描述方法的电梯控制系统建模及仿真.PDFVIP

第22 卷第9 期 系 统 仿 真 学 报© Vol. 22 No. 9 2010 年9 月 Journal of System Simulation Sep., 2010 基于规则化描述方法的电梯控制系统建模及仿真 1,2 1 1,2 1,2 韩江洪 ，魏正佳 ，魏振春 ，刘小平 （1.合肥工业大学计算机与信息学院, 合肥 230009 ；2.安全关键工业测控技术教育部工程研究中心, 合肥 230009 ） 摘 要：针对电梯控制系统的高度离散性和动态性，使用规则化描述方法 （RDM ）对电梯控制系 统进行建模。相对传统的基于产生式规则的系统，引入了分模块消息耦合思想，有效地降低了系统 的状态维数。该方法拓展了传统产生式表示法的描述能力，扩展了其应用范围。仿真结果表明， RDM 是一种有效的离散事件系统建模方法。 关键词：电梯控制系统；规则化描述方法；离散事件系统；产生式规则 中图分类号：TP13 文献标识码：A 文章编号：1004-731X (2010) 09-2203-03 Elevator Control Modeling and Simulation Based on Rule Description Method 1,2 1 1,2 1,2 HAN Jiang-hong , WEI Zheng-jia , WEI Zhen-chun , LIU Xiao-ping (1. School of Computer and Information, Hefei University of Technology, Hefei 230009, China; 2. Engineering Research Center of Safety Critical Industrial Measurement and Control Technology, Ministry of Education, Hefei 230009, China) Abstract: Rule Description Method (RDM) was applied in elevator control system modeling which was highly discrete and dynamic. Comparing with the traditional rule based system, systems division and coupling with messages were introduced into the RDM, which reduced the state dimensions of complex systems effectively. This method enhanced the ability and expanded the extension that traditional production rules could be applied in. The results of simulation show that the RDM is an effective method of modeling for discrete event system. Key words: elevator control system; rule description method; DES; production rule 引 言