8in超高强度直连型石油套管开发.pdf

7-5/8 in 超高强度直连型石油套管的开发 ： doi 10.3969/j.i ssn.1006-110X.2014.02.002 7-5/8 in 超高强度直连型石油套管的开发 李恒政，卢小庆，扈 立，王 正，张 旭 （天津钢管集团股份有限公司技术中心，天津300301 ） [摘 要] 根据超深复杂井身结构设计的需要，开发了7-5/8 in 超高强度直连型石油套管。通过合理钢种设计及工 ， ；良好的材料性能 ，解决了直连型套管连接强 艺控制 使得套管 超高强度下具有良好的韧性 及螺纹密封面的设计 度和密封性能的问题。试验结果表明，7-5/8 in 超高强度直连型石油套管不仅具有超高的抗挤毁能力，还具有良好的 连接强度及密封性能，适用于特殊井身结构的盐层段。 [关键词] 石油套管；直连型；连接强度；密封性能；抗挤毁性能 Development of 7-5/8 inch Super High Strength Flush Jo int Oil Casing LI Heng-zheng, LU X iao-q ing, HU Li, W A NG Zhe ng and ZHA NG Xu (Technology Center of Tianji n Pipe [Group] Corporation, Tianji n 300301, China ) Abstract According to the design requirement by super deep well structure, 7 -5/8 inch super high strength flush j oint oil casing was developed. Through reasonable steel grade design and process con原 trol, the said casing possessed excellent toughness under super high strength. Good material properties and thread sealing surface design solved the problem in the j oint strength and sealing performance of direct-connected oil casing. Test results showed that 7-5/8 in ultra high strength flush j oint oil casing, with super high anti -collapse strength and excellent j oint strength and sealing performance, was suit原 able for application at the salt bed of special well structure. Key words oil casing; flush j oint; j oint strength; sealing performance; anti-collapse performance 1 引言 计，非常规井身结构设计中有较好的应用。 我国西部油田地质条件复杂，油气埋藏深，地 2 石油套管设计思路 层压力高，压力系统多，勘探开发的难度大。许多井 我国西部深井、超深井常规井身结构一般为 钻达目的层前要钻穿多套压力及岩性不同的地 20 in伊13.375 in