单片机控制sim900a收发短信.doc

单片机接受指定短信内容，1602显示短信内容，单片机对短信内容作判断，若为所要求的内容，则返回一条短信 #include reg52.h //单片机头文件 #include string.h #include lcd1602_drv.h #define uchar unsigned char #define uint unsigned int #define Rx_data_length 110 uchar Admin_num[11]=xxxxxxxxxxx; //手机号码 uchar i,j; bit Response_receive_SMS_flag=0; sbit RS_1602=P2^6; //1602数据/命令选择引脚 sbit LCD_RW=P2^5; //1602读写引脚 sbit E_1602=P2^7; //1602使能引脚 uchar Rx_bit,i; uchar xdata Rx_data[Rx_data_length]; uchar w[]=Waiting ...... ; void Response_receive_SMS(void); void Uart_SendChar(uchar ch); void Uart_SendString(uchar *String); void uart_init(void); void Clear_Rxdata(uchar length); void delay(uint xms) { uint i,j; for(i=xms;i0;i--) for(j=100;j0;j--); } void main(void) { uint aa=0； EA=1; //开总中断 LCD_RW=0; //LCD RW 主程序接地一直等于0 uart_init(); //串口初始化 lcd_init(); //液晶屏显示初始化 Rx_bit=0; Uart_SendString(AT+CLIP=1\r\n); delay(500); Uart_SendString(AT+CMGF=1\r\n); //设置sim900模块为英文方式发送短信 delay(500); Uart_SendString(AT+CMGD=1\r\n); //清除所有短信 delay(500); Uart_SendString(AT+CSCS=\GSM\\r); //设置sim900模块GSM字符集 delay(500); Uart_SendString(AT+CMGF=1\r); //设置sim900模块为英文方式发送短信 delay(500); Clear_Rxdata(Rx_data_length); delay(500); memset(Rx_data, ,sizeof(Rx_data)); //Rx_data数组中元素都为空格 write_1602com(one); for(i=0;i16;i++) { write_1602dat(w[i]); } while(1) { EA=1; EX0=1; //开外部中断0 IT0=0; //脉冲触发方式 Response_receive_SMS(); //循环检测是否收到短信，若收到短信则 Response_receive_SMS_flag==1 delay(100); Rx_bit=0; if(Response_receive_SMS_flag==1) { Uart_SendString(AT+CMGR=1\r\n); //短信读取 delay(2000); write_1602com(one); for(i=0;i16;i++) { write_1602dat(Rx_data[69+i]); } if(Rx_data[69]==xRx_data[70]==xRx_data[71]==axRx_data[72]==xRx_data[73]==x) //判断的短信内容，可以不止5位 { aa=1； } Response_receive_SMS_flag=0;