cgg模块RAMUR参数.docVIP

General The module removes multiples (characterized as events with a slower velocity) or linear events from a trace gather. The Y-flag must be set at the end of every elementary gather. Input traces must be ordered according to the spatial co-ordinate used for the Radon transform. Traces are output in the order of the input elementary gathers. Anti-multiple filtering (first option MA) The module computes a model of primary and multiple events. This computation is based on data decomposition into user-defined parabolas and performed using a high-resolution, de-aliased least-squares method in the frequency-space (f-x) domain for each frequency of the pass-band defined by FMIN and FMAX. Events corresponding to parabolas with a greater curvature are considered to be multiples. Events corresponding to parabolas smaller than this threshold are considered to be primary events. The zone limits between primaries and multiples is user defined (DTCUT). The difference between data and the sum of primary and multiple events is considered as linear noise. By default, the module subtracts the model of multiples or the model of multiples plus the linear noise from the input gather (see the LAMBDA parameter). Anti-noise filtering (first option NA) The module builds signal and (linear) noise events. This building is based on a userdefined linear model. On input, a gather is modelled as a superimposition of a number of linear events plus the random noise. The computation is performed using a high-resolution, de-aliased least-squares method in the frequency- space (f-x) domain for each frequency of the pass-band defined by FMIN and FMAX. CGG 2 RAMUR User’s Manual Geocluster By default, the module subtracts the model with organized noise or the model with organized noise plus the random noise from each gather (see LAMBDA parameter). Equalization options (second option PA) Input traces are equalized before filtering. This equalization is similar to that applied by the DYNQU module (blank