腐蚀管道临界剩余壁厚有限元分析.pdfVIP

·· 腐蚀管道临界剩余壁厚的有限元分析 1 1 1 2 魏化中 ，周小兵 ，舒安庆 ，帅健 （1.武汉工程大学 机械工程学院，湖北 武汉 430074 ；2.石油大学 机电工程学院，北京 102249 ） 以含轴向腐蚀缺陷压力管道的最小允许壁厚为研究对象，应用大型通用有限元分析软件－ANSYS 的OPT 优化设 计模块，建立有限元模型，进行非线性有限元分析。并以国外公开发表的实验模型为算例，得到与实验数据相近的结果， 验证了有限元分析的准确性。 腐蚀管道；轴向缺陷；临界壁厚；有限元分析；OPT O242.21 A 200704 0027 03 Finete element analysis of critical residual wall thickness of corroded pipeline 1 1 1 WEI Hua-zhong ，ZHOU Xiao-bing ，SHU An-qing ，SHUAI Jian （1.School of Mechanical Engineering ，Wuhan Institute of Technology，Wuhan 430074，China; 2.College of Mechanical and Electrical Engineering，Petroleum University of China，Beijing 102249，China） Abstract ：In order to calculate the critical residual wall thickness of corroded pipeline including longitudinal defect , The paper takes it as the research object, applies the optimization module of the general finite element software—ANSYS, set up finite element models, carry on nonlinear finite element analysis. By the validation of foreign experimental date, It can provide accurate prediction. Key words ：corroded pipeline ；longitudinal defect ；critical wall thickness ；finite element analysis ；OPT T P D min σ [2] ANSYS