PIR的Consumption和Reduction.doc

基本概念：PIR（Planned Independent Requirement）的Consumpiton（消耗）和Reduction（減小）是什麼。前者是MD04中的視覺效果，是動態變化的；後者則是真真正正減小了PIR，增加了提取數量。 The consumption reduces planned independent requirements dynamically, whereas the reduction physically reduces the planning quantity and increases the withdrawal quantity accordingly. SAP Note: 772856 ? 1. Question:What is the difference between planned independent requirement consumption and planned independent requirement reduction ?Answer:The consumption reduces planned independent requirements dynamically, whereas the reduction physically reduces the planning quantity and increases the withdrawal quantity accordingly.For example: You create a planned independent requirement with 100 pieces. This planned independent requirement is consumed against a sales order with 10 pieces. The planning quantity and withdrawal quantity remain the same (see MD63) but the planned independent requirement is displayed in the stock/requirements list (MD04) with the quantity 90. The independent requirements reduction occurs when you post the goods movement, in this case, with the goods issue for the sales order. The planning quantity of the planned independent requirement is reduced to 90 pieces and the withdrawal quantity is increased from 0 to 10 (see MD63). In the stock/requirements list, the planned independent requirement is still displayed with 90 pieces despite the reduced planning quantity because when you post the goods issue, the customer requirement against which the planned independent requirements had been consumed also disappears. 2. Question:Which consumption parameters (Consumption mode/consumption period) are taken into account?Answer:The parameters maintained in the material master (material requirements planning view 3) have the highest priority. If you do not specify a consumption mode, the system uses the consumption parameters from the MRP group that is assigned to the material. If a consumption mode is not specified there, the consu