Binks Mach 1sl Hvlp Spray Gun宾克斯喷枪.doc

Binks MACH HVLP Gun The Binks MACH HVLP Gun is a top quality high performance air spray gun. You only have to pick it up to feel the difference. Its superbly balanced forged aluminum body offers the operator extra comfort and control. All of the gun’s components are machined and finished to exacting tolerances and only the best materials are used, ensuring years of peak efficiency. Binks MACH HVLP 喷枪是高品质的空气喷枪。你可以拿起来感觉一下Binks MACH HVLP 喷枪的不一样。Binks MACH HVLP 喷枪超平衡锻铝机身让使用者感觉非常舒适和好控制。所有喷枪的零部件的公差要求都很严格，所用材料都是最好的，这就确保了这种喷枪能使用多年的峰值效率。 The Binks MACH HVLP Gun has special nozzles and modifications that allow it to operate at high transfer efficiencies in compliance with the “California South Coast Air Quality Management District”regulations as a “high volume, low pressure” airspray gun. Binks MACH HVLP 喷枪作为“高流量低气压”的空气喷枪，有一个特殊的喷嘴并且在操作时能高效率转换，这使得它能遵守“加利福尼亚南海岸空气质量管理区”的规章制度 。 The air inlet passage in the gun body incorporates a venture which limits air-flow. High pressure, low volume airflow is converted to high volume, low pressure at this point. Special air and fluid at low air pressures and velocities, creating the “soft spray” effect for high transfer efficiencies. To obtain optimum performance from your new MACH 1SL HVLP airspray gun, read all instructions carefully. 在喷枪的出口通道包含一个限制气流的冒险行动。这时候高气压，低气流被转化成高气流，低气压。特殊的空气和液体在低气压和速率下变成高转换效率的“软喷”。 为了达到Binks MACH HVLP 喷枪的最佳使用效果，请认真阅读使用说明。 Illustration Key 图解 Lightweight Air Nozzle 轻便的喷嘴 Fluid Inlet 3/8”NPS(m) 油漆出口3/8”NPS(m) Extra Smooth Trigger Action 扳机 Stainless Steel Fluid Nozzle and Needle 不锈钢喷嘴喷针 Side Port Control 侧端口控制旋钮 Fluid Control Knob 流体控制旋钮 Forged Aluminum Body 锻造铝制机身 Air Inlet 1/4”NPS(m) 空气入口 1/4”NPS(m) CONNECTING GUN TO “PRESSURE ASSISTED”1 QT. CUP (Figure 1) The stainless steel pressure-assisted 1-quart cup utilizes a low pressure air bleed port on the gun head to slightly pressurize the cup and provide fluid flow to the nozzle. A check valve prevents the cup from depressurizing when the gun trigger is released and