某综合楼暖通空调设计计算书[模板].docVIP

扬 州 大 学 本 科 生 毕 业 设 计 毕业设计题目： 上海市某综合写字楼暖通空调设计 学 生 姓 名： 所 在 学 院： 能源与动力工程学院 专业及班级： 指 导 教 师： 罗 翌 完 成 日 期： 摘要 ㎡㎡关键词： Abstract The project is the design of a office building’s heating ventilation and air-conditioning in shanghai, it is a tower building having eight floors totally 33.3 meters high and with a wholly area of 7435 square meters, air-conditioned area are 4560 square meters, the cooling load of the project is 430kW, and the heating load is 320kW, the refrigerating station is built in the garage on the ground，through the comparison of technical and economic of this three cold and heat source forms of the air source heat pump, LiBr absorption chiller and heat exchangers, Screw Chillers and heat exchangers, the conclusion is the form of screw chillers and heat exchanger that the most excellent program; so choose 30HXY-130A models of water-cooled screw chillers of carrier company as the cold source of the project, model of BR0.2 of the steam-water exchange of Yongda as a heat source of the project; through the comparison of the advantages and disadvantages and occasions of air-conditioning program, in light of the actual situation of the project, the market used by the entire air concentrate CAV air-conditioning system, the remaining parts used by the fan coil unit plus an independent fresh wind-centralized air-conditioning system，The basis of this air-conditioning design wind, water systems and sources room temperature; In accordance with the relevant regulatory requirements for architectural design of ventilation and smoke control system. Key words: air conditioning system ventilation system cold and heat source smoke control 目 录 1 绪论 1 1.1引言 1 1.2设计目的 2 1.3设计任务 3 1.4工程概况 3 1.5设计依据 3 1.5.1室外气象参数 3 1.5.2建筑维护结构及其热工性能 3 1.5.3室内设计参数 4 1.5.4室内人数和照明、设备负荷的设计依据 4 1.5.5当地基本条件 5 1.5.6执行规范 5 2 负荷计算 6 2.1夏季空调冷负荷和湿负荷 6 2.1.1制冷系统冷负荷的组成 6 2.1.2夏季空调冷负荷 7 2.2冬季空调热负荷和湿负荷 11 2.2.1围护结构的耗热量 11 2.2.2门窗缝隙渗入冷空气的耗热量 12 2.2.3冬季湿负