网络管控系统的柔性可重构结构设计.pdfVIP

第33 卷第11 期 通 信 学 报 Vol.33 No. 11 2012 年11 月 Journal on Communications November 2012 doi:10.3969/j.issn.1000-436x.2012.11.011 网络管控系统的柔性可重构结构设计 李玉峰，邱菡，刘勤让，兰巨龙 （国家数字交换系统工程技术研究中心，河南郑州 450002 ） 摘 要：网络管控系统是面向互联网“可管、可控、可信”需求提出的新设备形态。骨干链路级管控设备的体系 结构目前基本沿袭核心路由器的设计思路，存在数据平面、控制平面分离无法满足管控系统软硬件协同深层次数 据处理需求，刚性封闭系统构建方式无法满足新业务识别柔性需求的问题。由此提出网络管控系统的软硬件交换 式松耦合协同处理结构和软硬件循环迭代迁移结构和方法，可实现软硬件融和式协同数据处理，满足了新业务识 别的柔性迁移需求。 关键词：网络管控系统；体系结构；可重构；循环迭代；迁移 中图分类号：TP393.08 文献标识码：A 文章编号：1000-436X(2012)11-0084-07 Design of network management and regulation system over flexible reconfiguration LI Yu-feng, QIU Han, LIU Qin-rang, LAN Ju-long (National Digital Switching System Engineering and Technological Research Center, Zhengzhou 450002,China) Abstract: Network management and regulation system is a new arising appliance for the manageable, controllable and trustworthy demand of the Internet. The architecture design of the backbone link-level management and regulation sys- tem usually follows the core router, in which the separation of the data plane and the control plane could not meet the re- quirement of HW/SW data co-process, the rigid connection with closed building style could not satisfy the flexible iden- tification of new applications. The loosely coupled switching HW/SW co-process architecture and the iterative looping HW/SW migration architecture were proposed, which could satisfy the above HW/SW co-process demand and the new application flexible identification demand. Key words: network management and regulation system; architecture design; flexible reconfiguration; iterative