EUP8207 外置MOS管大电流开关式锂电池充电ICEUP8207 外置MOS管大电流开关式锂电池充电IC.pdfVIP

E UP8207-4.2/8.4/8.4A Switch Mode Li-Ion/Polymer Battery Charger DESCRIPTION FEATURES The EUP8207 is a constant current, constant voltage Wide Input Supply Voltage Range: Li-Ion battery charger controller that uses a current mode 4.8V to 20V – 4.2 Version PWM step-down (buck) switching architecture. With a 8.9V to 20V – 8.4 Version 500kHz switching frequency, the EUP8207 provides a small, simple and efficient solution to fast charge one 8.9V to 20V – 8.4A Version (4.2V) or two (8.4V) cell lithium-ion batteries. 500kHz Switching Frequency The EUP8207 charges the battery in three phases: End-of-Charge Current Detection Output conditioning, constant current, and constant voltage. An 7 Hour Charge Termination Timer external sense resistor sets the charge current with ± 10% ± 1% Charge Voltage Accuracy accuracy. An internal resistor divider and precision reference set the final float voltage to 4.2V per cell with ± ± 10% Charge Current Accuracy 1% accuracy. An internal comparator detects the near Low 10µA Reverse Battery Drain Current end-of-charge condition while an internal timer sets the Automatic Battery Recharge total charge time and terminates the charge cycle. The EUP8207 automatically