轴的ansys画法.docxVIP

第一次作业轴创建圆柱体Main menuPreprocessorModelingCreate VolumesCylinderSolid CylinderX=0,Y=0,Radius=15, Depth=25;X=0,Y=0,Radius=20,Depth=-80;转移工作平面并建圆柱体Utility Menu: WorkPlane Offset WP to XYZ Locations+X=0,Y=0,Z=-80;Main menuPreprocessorModelingCreate VolumesCylinderSolid CylinderX=0,Y=0,Radius=27,Depth=-6;转移工作平面并建圆柱体Utility Menu: WorkPlane Offset WP to XYZ Locations+X=0,Y=0,Z=-86;Main menuPreprocessorModelingCreate VolumesCylinderSolid CylinderX=0,Y=0,Radius=15,Depth=-25;转移工作平面并建圆柱体Utility Menu: WorkPlane Offset WP to XYZ Locations+X=0,Y=0,Z=-111;Main MenuPreprocessorModelingCreate VolumesCylinder