MSDS FRAC MELT HDPE ERC - Engineered Recycling Company：MSDS压裂融化HDPE ERC工程循环再造公司.doc

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION IDENTIFICATION Product Name: Fractional Melt HDPE Chemical Name: Base Resin: Scrap Ethene or Propene Homo and/or Copolymer Mixture Chemical Family: Polyethylene Compounds Formula: Not Applicable (mixture) Synonym: None COMPANY IDENTIFICATION Engineered Recycling Company, LLC 1011 Woodward Ave. Charlotte, NC 28206 Prepared By: Laboratory Department Print Date: 03/30/09 EMERGENCY TELEPHONE NUMBER Number for non-emergency questions concerning MSDS: 704-358-6700 2. COMPOSITION INFORMATION Components CAS# %W/W Hazard Mixture of scrap ethane or Not Available =99% WHMIS: not hazardous propene and/or copolymers This product may contain one or more of the following: Polyethylene Homopolymer, Polypropylene Homopolymer, Copolymers and Terpolymers of Ethylene and/or Propylene with Butene, Hexene, and/or Octene, Ethylene Propylene Copolymers, Ethylene Vinyl Acetate, Ethylene Ethyl Acrylate. Composition amount varies. 3. HAZARDS IDENTIFICATION 3.1 EMERGENCY OVERVIEW Appearance 0.150 inch diameter pellets; black or gray color Physical Pellets State Odor Negligible or slight characteristic odor Hazards of Caution! Airborne dust particles may form explosive air-dust mixture. Product Plastic bag or liner, if present, may cause static ignition hazard. Exposure to dust and processing fumes may cause irritation of skin, Eyes, and respiratory tract. 3.2 POTENTIAL HEALTH EFFECTS General Health Hazards Treat fines and dust as nuisance particulates. Avoid breathing dust and processing fumes. Dust causes eye irritation, experienced as stinging and discomfort or pain. Polyolefin pellets or granules are abrasive and may cause mechanical skin irritation. Molten or hot polymer will cause thermal burns. Potential Effects of a Single Acute Exposure Inhalation See General Health Hazards. Eye Contact See General Health Hazards. Skin Contact See General Health Hazards. Skin Absorption No evidence o