GM868气体超声波流量计英文说明书.docVIP

GE Measurement Control DigitalFlow? GM868 Panametrics General-Purpose Gas Ultrasonic Flowmeter Applications Features The DigitalFlow GM868 ? ow transmitter is a complete ultrasonic ? ow metering system for measurement of most gases including: ? Full-featured ? owmeter package ? Transducer removable under line pressure ? No moving parts ? Hydrocarbon gases ? Vent gases ? No pressure drop ? Biogases ? Wide rangeability with 1500 to 1 turndown ratio ? Non-obstructive ? ow measurement ? Tolerance to dirty streams ? Digester gases ? Fuel gases ? Waste gases ? Incinerator air ? ow ? Vapor recovery ? Stack gases ? Low maintenance ? Suitable for high temperatures ? Two-path measurement available for maximum accuracy ? Other gases GE imagination at work  Panametrics Ultrasonic General Purpose Gas Flowmeter For maximum accuracy, use a two-channel meter to measure along two different paths at the same location. A two-channel meter can also measure the ? ow in two separate pipes or at two different places in the same pipe. The DigitalFlow GM868 ? owmeter uses the patented Correlation Transit-Time? method of ultrasonic ? ow measurement to provide accurate, drift-free measurements, without impeding or obstructing the ? owt. No Pressure Drop, Low Maintenance Since the DigitalFlow GM868’s transducers do not obstruct the ? ow, they generally do not cause any pressure drop as other types of ? owmeters do. The DigitalFlow GM868 has no parts that foul or collect debris, and no moving parts to wear out. As a result, it requires no lubrication, cleaning or other routine maintenance. Wide Range of Pipe Sizes and Flow Conditions With its broad range of measurement velocities, and its ability to measure ? ow in any pipe from small to very large, one DigitalFlow GM868 meter does the job of several conventional meters. It handles pipes from 1 to 120 inches in diameter (2.5 cm to 3 m), and velocities from 0.1 to 150 ft/s (0.03 to 46 m/s)―in either direction, in steady