Relays Technical Notes Omron外语英文电子书.pdfVIP

G E N E R A L I N F O R M A T I O N General Information Options Straight PCB terminal Quick-connect terminal Gull-wing SMT terminal PCB terminals are normally straight. G E N E R A L I N F O R M A T I O N Curved-tail (S-shaped) PCB terminal Some relays have terminals that are bent into an “S” shape. This secures the PCB relay to the PCB prior to soldering, helping the terminals stay in their holes, “Inside L” SMT terminal keeping the relay level. Quick-connect/PCB terminal Built-in diode A diode is built into some relays, wired in parallel with the coil to absorb the Plug-in terminal counterelectromotive force (counter emf) generated by the coil. Operation indicator Some relays are provided with a light- emitting diode (LED), wired in parallel with the coil. This permits a fast-check of the relay’s operating status. Dimensions Mounting orientation mark On dimensional drawings in all OMRON literature this mark is left-oriented. Mounting On top of all OMRON relays is a mark holes, terminal arrangements, and internal connections follow this alignment. The indicating where the relay coil is located. following two symbols are used to represent the orientation mark: