NAS6000最初配置过程.doc

  1. 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
  2. 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
  3. 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
NAS6000最初配置过程

NAS6040 划分操作系统盘、安装操作系统过程 DS5000 划盘,认盘后 * help ? environment led_off scsi aggr fcadmin led_on sesdiag disk fcdiag outb storage disk_list fcstat raid_config sysconfig disk_mung fctest sasadmin version diskcopy halt sasstat vol disktest help sata xortest * halt Phoenix TrustedCore(tm) Server Copyright 1985-2006 Phoenix Technologies Ltd. All Rights Reserved BIOS version: 4.2.0 Portions Copyright (c) 2007-2009 NetApp. All Rights Reserved. CPU= Dual-Core AMD Opteron(tm) Processor 2216 X 1 Testing RAM 512MB RAM tested 4096MB RAM installed Fixed Disk 0: STEC Boot Loader version 1.6.1 Copyright (C) 2000-2003 Broadcom Corporation. Portions Copyright (C) 2002-2009 NetApp CPU Type: Dual-Core AMD Opteron(tm) Processor 2216 LOADER-B LOADER-B reboot Invalid command: reboot Available commands: version, update_flash, netboot, boot_diags, boot_backup, boot_primary, boot_ontap, flash, bye, set, lsmod, autoboot, go, boot, load, ping, arp, ifconfig, show, savenv, saveenv, unsetenv, set-defaults, setenv, printenv, help *** command status = -1 LOADER-B autoboot Loading x86_64/kernel/primary.krn:.............0x2000000x2ab79580x39d16b0/4665549 0x3e4477d/3 Entry at 0Starting program at 0Press CTRL-C for special boot menu Thu May 20 06:42:07 GMT [nvram.battery.state:info]: The NVRAM battery is currently ON. Special boot options menu will be available. Thu May 20 06:42:10 GMT [cf.nm.nicTransitionUp:info]: Interconnect link 0 is UP Thu May 20 06:42:15 GMT [fci.adapter.nonArray:info]: Fibre Channel adapter 0a is on the list of non-Storage Array adapters. Thu May 20 06:42:15 GMT [fci.adapter.nonA

文档评论(0)

xcs88858 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:8130065136000003

1亿VIP精品文档

相关文档