RedHatLinux 集群配置 RHCS.docx

hp-dl580G7 RHCS安装步骤安装RedHat-AS-5.7-64(两台)配置心跳地址与ilo3地址server1心跳地址： 54（网关）server1 ilo3地址0 54（网关）server2 心跳地址： 54（网关）server2 ilo3地址1 54（网关）配置两台主机host文件 #vi /etc/host 加入两台的心跳地址与ilo地址以及主机名称 例如： server1 server2 ilo3-1 0 ilo3-2 1配置共享存储从存储分配所需共享磁盘给两台机器（两台机器共享一个磁盘）存储若是多路径，两台机器分别安装multipath软件(HP官网下载)HP multipath软件只支持5.5以下版本，需要修改/etc/redhat-release文件，把版本改为5.5以下即可，等软件安装好后，再改回来创建pvpvcreate /dev/mapper/mpath(n)创建vgvgcreate vg01 /dev/mapper/mpath(n)创建lvlvcreate –l 10240 –n lv01 vg01格式化lv(若是裸设备的话，跳过)mkfs.ext3 /dev/vg01/lv01两台机器创建存储挂载点mkdir sybaseyum安装RHCS所需的安装包yum cmanrpm安装RHCS所需的依赖的包安装cman(光盘的Server目录下)rpm -ivh perl-XML-NamespaceSupport-1.09-1.2.1.noarch.rpmrpm -ivh perl-XML-SAX-0.14-8.noarch.rpm rpm -ivh perl-XML-LibXML-Common-0.13-8.2.2.x86_64.rpmrpm -ivh perl-XML-LibXML-1.58-6.x86_64.rpm rpm -ivh perl-Net-Telnet-3.03-5.noarch.rpmrpm -ivh pexpect-2.3-3.el5.noarch.rpmrpm -ivh openais-0.80.6-30.el5.x86_64.rpmrpm -ivh python-pycurl--8.el5.x86_64.rpmrpm -ivh python-suds-0.4.1-2.el5.noarch.rpmrpm -ivh cman-2.0.115-85.el5.x86_64.rpm安装rgmanger(Cluster目录下) rpm -ivh rgmanager-2.0.52-21.el5.x86_64.rpm安装system-config-cluster（Cluster目录下）rpm -ivh system-config-cluster-1.0.57-9.noarch.rpm安装ricci(光盘的Server目录下)rpm -ivh oddjob-0.27-11.el5.x86_64.rpm oddjob-libs-0.27.11.el5.x86_64.rpm(需要同时安装，要不然装不想上)（Cluster目录下）rpm -ivh modcluster-0.12.1-2.el5.x86_64.rpmrpm -ivh ricci-0.12.2-32.el5.x86_64.rpm安装luci(光盘的Server目录下)rpm -ivh tix-8.4.0-11.fc6.x86_64.rpmrpm -ivh tkinter-2.4.3-44.el5.x86_64.rpmrpm -ivh python-imaging-1.1.5-7.el5.x86_64.rpm（Cluster目录下）rpm -ivh luci-0.12.2-32.el5.x86_64.rpm安装HPSUM（psp）安装方法省略配置IPMI检测是否安装rpm –qa |grep IPMI若是没安装，加载安装光盘安装（安装好HPSUM后，会更新IPMI）配置ipmi自启动chkconfig --level 2345 ipmi onservice ipmi startIPMI检测ipmitool -v -H 0 -I lanplus -U admin mc info(ip地址为对方的地址，都互相检测下)配置集群system-config-cluster注：先配置集群信息才能启动集群服务(/etc/cluster/cluster.conf)选择Create New Configuration选择合适的集群名称点击ok点击Add a Cluster Node,添加节点输入集群节点名称，点击OK若有多个节点，依次增加点击Add a Fence Device添加Fence设备点击OK继续，若有多个Fen