LEU子系统说明.doc

LEU主要功能： ??LEU (轨旁电子单元): LEU 子系统(欧洲编码器产品) 可从CBI设备获取信号机(间隔或路线间隔) 和道岔状态，并向闭塞模式信标(可切换式信标)提供信息. LEU 用于满足闭塞模式下的功能要求. CC在闭塞模式激活时仅可从与LEU连接的信标处获取变量信息 一台LEU 可支持四个信标. 注: 保护区段不能从CBI获取, LEU 强制使SGD 中显示的所有保护区段变量处于允许状态. 汇合区的点也不能从CBI获取, LEU 强制使2 个变量处于与变量获取进路相对应的正确位置 LEU子系统说明Description of subsystem LEU LEU子系统同其它子系统(内部和外部)和相关人员的交互方式如下图所示：The links between the LEU sub-system and other sub-systems (internal and external) and actors are described as follow: 设计原则Design principles LEU子系统从CI设备获取各种轨旁信息，并为信号机附近的有源信标提供信息。LEU是安全相关的轨旁设备，与其相关的信号机和欧式信标接口.The LEU sub system allows acquisition of trackside variable information from CI equipment and provides messages to switching beacon installed at signal proximity. The LEU is the safety related track-side equipment interfaced with the lateral signalling and the Eurobalises LEU 是一种用于执行后备模式功能的产品.LEU is a product used to implement the BLOCK mode functionality. 为了提高功能的可用性,后备模式结构是冗余的.The Block mode architecture shall be redundant to improve the availability of the function. 部分信号机由一个信标防护，每个信标从一个LEU获取信息并传送至列车.For stopping signal protected by 1 beacon. Each beacon gets the information to transmit to the train from one LEU. 接近信号机由两个信标防护, 每个信标可从不同的LEU处获取信息并传送至列车。For approach signal protected by 2 beacons. Each beacon will get the information to transmit to the train from a different LEUs for availability. 每个LEU可管理最多4个信标.Each LEU can manage up to 4 beacons. 图10: 后备模式轨旁子系统结构Figure 10 Trackside subsystem architecture for Block mode 子系统内容Subsystem content 图11: LEU 图片Figure 11 LEU Picture LEU 划分为如下4个主要部分:The LEU can be divided into four mains parts : 底板The bottom plate 底板用来将LEU装入机柜或装在特定支架上。The bottom plate is used to install the LEU into a cubicle or on a specific support. 前盖The front cover 前盖用来防护连接器进水和屏蔽EMC。The front cover aims to protect the connectors from water, and to close the EMC shield. 它装在LEU盒上。It has to be set on the LEU box. LEU 盒The LEU box LEU 盒用来放置4块电路板，在后面板The LEU box is for the 4 electronics boards installation. It already contains the mother