Polycube参数化自动构造-软件学报.PDFVIP

ISSN 1000-9825, CODEN RUXUEW E-mail: jos@ Journal of Software , Vol.19, No.11, November 2008, pp.3061−3072 DOI: 10.3724/SP.J.1001.2008.03061 Tel/Fax: +86-10 © 2008 by Journal of Software . All rights reserved. ∗ Polycube参数化自动构造 + 林俊聪 , 金小刚, 范争文, 刘圣军, 冯结青 (浙江大学 CADCG 国家重点实验室,浙江 杭州 310027) Automatic Polycube Construction and Parameterization + LIN Jun-Cong , JIN Xiao-Gang, FAN Zheng-Wen, LIU Sheng-Jun, FENG Jie-Qing (State Key Laboratory of CADCG, Zhejiang University, Hangzhou 310027, China) + Corresponding author: E-mail: Sworm.Lin@ Lin JC, Jin XG, Fan ZW, Liu SJ, Feng JQ. Automatic Polycube construction and parameterization. Journal of Software, 2008,19(11):3061−3072. /1000-9825/19/3061.htm Abstract : An automatic Polycube construction and parameterization method is proposed in this paper. This approach first decomposes the input mesh into a set of feature regions. Each region is approximated by a simple Polycube which is further split into several patches. Since each patch corresponds to a rectangular sub-surface of the Polycube, they can be parameterized independently. A smoothing procedure between patches is performed to reduce the overall parametric distortion. This method makes Polycube parameterization more convenient in texture mapping and other applications. Key words: parameterization; Polycube; automatic construction; Reeb graph; feature-based segmentation 摘 要: 提出了 Polycube 参数化的自动构造技术.该算法首先对网格进行特征分解,然后用立方体组成的一些基 本形体逼近分解得到的各部分网格区域,确定基本Polycube 的顶点和边在区域上的对应顶点和路径,将各区域进一 步分解为面片,从而在构造Polycube 的同时完成对曲面的分片,最后再分片参数化并进行面片间的平滑,高效地实现 了Polycube 的自动参数化.该方法在很大程度上减少了Polycube 构造过程中的人工干涉,使其