卡板级进模具设计-机械模具毕业设计.docVIP

文档包括:说明书一份,46页,31692字左右. CAD图纸共9张: 卡板级进模具设计 摘? 要：通过对卡板的工艺特点进行分析，提出了冲孔、落料、压弯、翻边等成形工艺，给出了多工位级进模的冲压方案，介绍了卡板多工位级进模的结构特点、模具的工作过程和设计要点。卡板模具经调试、试制，零件成形效果理想。此模具能满足其精度要求，提高了生产效率。关键词：卡板；级进模；模具结构；设计 The design of card board-level progressive die Abstract:By means of the analysis of the technical characteristics of cardboard, this article brings in some forming technologies such as punching, blanking, bending, flanging etc. what is more, it also provides a stamping program of progressive die and also recommends the structural features, the working process together with the main design points of cardboar