8.2.3 IC卡读写系统的软件系统.docVIP

8.2.3 IC卡读写系统的软件系统 #include reg51.h #include absacc.h #include assert.h #include ctype.h #include intrins.h #include math.h #include setjmp.h #include stdarg.h #include stddef.h #include stdio.h #include stdlib.h #include string.h /********** 端口初始化**********/ sbit RST = P0.1; sbit CLK = P0.2; sbit IO = P0.3; /********** 内部RAM工作区间初始化 **********/ unsigned char SMCBUF[8]; /********** 基本函数 **********/ void dmsec (unsigned int count) //毫秒级延时函数 { unsigned char i; while (count) { for (i=1;i=228;i++); count--; } } void start (void) //启动函数 { SCON = 0x52; //设置 RS232 参数 TMOD = 0x20; TH1 = 0xfd; //传输速度 19200 TR1 = 1; RST = 0; //初始化I/O口 CLK = 0; IO = 1; } void smcdelay (void) // 脉冲延迟函数 { unsigned char i; i = 20; while (i0) i--; } void smcgetatr (void) // 将 SMCBUF (4 byte)赋给输出函数 { unsigned char a,c,x,i; RST = 1; //复位 smcdelay (); CLK = 1; smcdelay (); CLK = 0; smcdelay (); RST = 0; smcdelay (); c = 0; a = 0; x = 0; for (i=0;i=31;i++) // 读32位地址 { IO = 1; a = 1; if (IO) a |= 0x80; else a = 0x7f; CLK = 1; smcdelay (); CLK = 0; smcdelay (); if (++c==8) { SMCBUF[x++] = a; c = 0; a = 0; } } } void smcstart (void) //开始的条件函数 { CLK = 0; IO = 1; CLK = 1; smcdelay (); IO = 0; smcdelay (); CLK = 0; smcdelay (); } void smcstop (void) //结束的条件函数 { IO = 0; CLK = 1; smcdelay (); IO = 1; smcdelay (); CLK = 0; smcdelay (); } void smcwbyte (unsigned char x) //单字节写函数 { unsigned char i; fo