bond的创建.docVIP

bond的创建 [root@cms-dbs-ams-2]# cp /etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-bond0 //将ifcfg-eth0文件复制一份并命名成ifcfg-bond0 [roor@cms-dbs-ams-2]# vi /etc/sysconfig/network-scripts/ifcfg-bond0 # Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet DEVICE=bond0 //修改名字 BOOTPROTO=none ONBOOT=yes IPADDR=192.168.0.23 NETMASK=255.255.255.0 BONDING_OPTS=mode=1 miimon=100 //也可在后面的modprobe.conf文件里添加 TYPE=Ethernet //类型 [root@cms-dbs-ams-2 etc]# vi modprobe.conf //编辑此文件 alias eth0 e1000 alias eth1 e1000 alias scsi_hostadapter ata_piix alias scsi_hostadapter1 usb-storage alias bond0 bonding //增加一行 options bond0 miimon=100 mode=0 //增加一行,也可在bond0下面修改 ~ [root@cms-dbs-ams-2 etc]# vi rc.d/rc.local #!/bin/sh # # This script will be executed *after* all the other init scripts. # You can put your own initialization stuff in here if you dont # want to do the full Sys V style init stuff. touch /var/lock/subsys/local ifenslave bond0 eth0 eth1 //增加一行 [root@cms-dbs-ams-2 ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth0 //修改eth0 # Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet DEVICE=eth0 BOOTPROTO=none HWADDR=5C:F3:FC:09:16:78 ONBOOT=yes MASTER=bond0 //添加 SLAVE=yes //添加 USERCTL=no //添加 //编辑ifcfg-bond0,添加IP地址 [root@cms-dbs-ams-2 etc]# ifconfig eth0 Link encap:Ethernet HWaddr 00:0E:0C:BB:02:B2 inet addr:172.16.1.201 Bcast:172.16.1.255 Mask:255.255.255.0 inet6 addr: fe80::20e:cff:febb:2b2/64 Scope