LCD12864全部子函数.docVIP

LCD12864全部子函数 #includeLCD12864_12.h void delayu() { _nop_(); } //延时 a * 1ms void delaym(uint a) { uint i, j; for(i = a; i 0; i--) for(j = 110; j 0; j--); } //检测LCD是否处于忙状态, 若忙返回1, 空闲返回0 bit checkBusy() { bit busy; RS = 0; RW = 1; E = 1; delayu(); busy = (bit)(LCD_DATA0x80); E = 0; return busy ; } //等待LCD到空闲 void wait() { while(checkBusy()); } //写命令 void write_com(uchar cmd) { wait(); RS = 0; RW = 0; E = 0; LCD_DATA = cmd; delayu(); E = 1; E = 0; } //写数据 void write_data(uchar dat) { wait(); RS = 1; RW = 0; E = 0; LCD_DATA = dat; delayu(); E = 1; E = 0; } //读数据 uchar read_data(void) { uchar dsp_data; wait(); LCD_DATA=0xFF; RS = 1; RW = 1; E=0; E=1; delayu(); dsp_data=LCD_DATA; E = 0; return(dsp_data); } //初始化LCD void init() { write_com(0x30); //基本指令, 扩充指令为34H write_com(0x0c); //显示开, 关光标 write_com(0x01); //清屏 delaym(10); } void setPosition(uchar x, uchar y) { uchar p; switch(y%4) { case 0: p = 0x80; break; //第一行开始地址 case 1: p = 0x90; break; //第二行 case 2: p = 0x88; break; //第三行 case 3: p = 0x98; break; //第四行 } p += x; write_com(p); } void writestring(uchar * str) { uchar i = 0; while(str[i] != \0) { write_data(str[i++]); } } void lcd_DisplayImage(unsigned char *str) { unsigned char i; unsigned char j; unsigned char k; unsigned char bGDRAMAddrX = 0x80; //GDRAM水平地址 unsigned char bGDRAMAddrY = 0x80; //GDRAM垂直地址 for(i = 0; i 2; i++) // 在绘图GDRAM中写满屏图片数据 { for(j = 0; j 32; j++) { for(k = 0; k 8; k++)