X5045读写1程序.docVIP

X5045读写1程序 void X5045SpiOpen(void);//打开X5045片选 void X5045SpiClose(void);//关闭X5045片选 void X5045WriteEnable(void);//软件使能X5045写操作 void X5045WriteDisable(void);//软件禁止X5045写操作 unsigned char X5045SpiSend(unsigned char val);//X5045收发SPI协议 void X5045WriteByte(unsigned int addr, unsigned char val);//写X5045一个字节 void X5045WriteWord(unsigned int addr, unsigned int val);//写X5045一个字 unsigned char X5045ReadByte(unsigned int addr);//读X5045一个字节 unsigned int X5045ReadWord(unsigned int addr);//读X5045一个字 unsigned char X5045ReadStatus(void);//读X5045状态 void X5045WriteStatus(unsigned char val);//写X5045状态 void X5045WriteWait(void);//等待X5045写入完成 /*-------------------------------------- 打开X5045片选 --------------------------------------*/ void X5045SpiOpen(void) { EEPROMCS = 1;//WDT EEPROMSCK = 0; EEPROMSIO = 1;//SO=SI=1,释放总线 EEPROMCS = 0;//WDT;打开X5045片选CS } /*-------------------------------------- 关闭X5045片选 --------------------------------------*/ void X5045SpiClose(void) { EEPROMCS = 1;//关闭X5045片选CS EEPROMSIO = 1;//SO=SI=1,释放总线 EEPROMSCK = 0; } /*-------------------------------------- 软件使能X5045写操作 --------------------------------------*/ void X5045WriteEnable(void) { X5045SpiOpen();//打开X5045片选 EEPROMWP = 1;//硬件使能X5045写操作 X5045SpiSend(WREN);//发送使能X5045写命令 X5045SpiClose();//关闭X5045片选 } /*-------------------------------------- 软件禁止X5045写操作 --------------------------------------*/ void X5045WriteDisable(void) { X5045SpiOpen();//打开X5045片选 X5045SpiSend(WRDI);//发送禁止X5045写命令 EEPROMWP = 0;//硬件禁止X5045写操作 X5045SpiClose();//关闭X5045片选 } /*-------------------------------------- X5045收发SPI协议 --------------------------------------*/ unsigned char X5045SpiSend(unsigned char val) { unsigned char i; WDTRST = 0x1e;//89s52内狗 WDTRST = 0xe1;//89s52内狗 ACC = val; for (i = 8; i 0; i --) { CY = EEPROMSO;//取数据SO _rlca_();//存数据ACC.0读数据ACC.7同时进行 EEPROMSI = CY;//送数据SI EEPROMSCK = 1;//上升沿打入数据 _nop_(); EEPROMSCK = 0;//下降沿读入数据(首次为假动作)