装置区电气安装工程照明器具及配电箱(盘)分项工程施工方案(译).docVIP

目 录 一、编制说明 2 I. Instruction 二、编制依据 2 II. References 三、工程概况 4 III. General Engineering Condition 四、施工准备 6 IV. Construction preparation 五、施工程序 7 V. Construction Procedures 六、质量控制计划 8 VI. Quality Control Plan 七、施工技术措施 11 VII. Construction technical measures 八、资源需要量计划表 11 XIII. Resource demand plan 九、施工进度计划 15 IX. Construction Schedule 十、降低工程成本措施 16 X. Save construction cost measures 十一、HSE控制计划 17 XI. HSE Management Targets 一、编制说明 I. Instruction 本技术文件为上海赛科石油化工责任有限公司（SECCO）90万吨/年乙烯装置区冷区、热区、烯烃转换区照明器具及配电箱分项安装工程施工技术措施，用以指导装置区照明系统安装施工作业。该工程由中国石化集团北京工程公司（SEI）承接设计任务，上海市第七建筑工程有限公司承接土建施工任务，我公司承接全部电气安装施工任务，齐鲁石化工程有限公司承接全部工程监理任务。 This proposal is to specify the construction technical measures for item installation work of lighting apparatus and power distribution boxes in cold area, hot area and OCU of ethylene complex to instruct lighting system installation construction work of complex. It is designed by SEI. The civil construction will be carried out by Shanghai No.7 Construction Engineering Company. Our company will execute all electric construction in the substation. Qilu Petrochemical Engineering Co. Ltd charges all the supervision tasks of the engineering. 二、编制依据 II. References 1、施工规范 Construction specification over of electric equipment GB50168-92 《电气装置安装工程电缆线路施工及验收规范》 GB50168-92 Construction and acceptance specification of electrical device installation works for cable line GB50257-96 《电气装置安装工程爆炸和火灾危险环境电气装置施工及验收规范》 GB50257-96 Erection works of electrical installations Code of construction and acceptance of electric device within explosion and fire hazard atmosphere GB50303-2002《建筑电气工程施工质量验收规范》 GB50303-2002 Construction electric work quality acceptance specification SH3505-1999 《石油化工施工安全及验收规范》 SH3505-1999 Petrochemical construction safety and acceptance specification GB50194-1993 《建设工程施工现场供用电安全规范》； GB50194-1993 Specification of Power Supply and Utilization on Construction Site of Construction Project 2、施工图纸 Construction drawing 3102-7904-D1-