北京交通大学信号与系统期末考试试题.doc

北 京 交 通 大 学 考 试 试 题 课程名称：信号与系统 姓名： 学号： 班级： 成绩： 题 号 一 二 三 四 五 六 七 八 九 十 总分 得 分 阅卷人 一、填空题（每题3分，共30分） 1． . 2． x1(n)={1,3,3；n= ?1,0,1}, x2(n)={1,4；n= ?1,0}，determine x1(n)*x2(n) = . 3．Consider sampling ，determine the maximum of sampling interval T so that there will be no aliasing (s). 4．A LTI system has input and output ，determine the impulse response of this system . 5．A system has inputand output . If the system has properties, then the input and output pairs has the relationship: input is, so output is 。 6．The transfer function of a LTI system is, the system belongs to type . （high-pass, low-pass, band-pass or band-stop ?） 7．the FS ofis , the FS of is 。 8. the impulse response of integrator is ，the impulse response of differentiator is , the impulse response of discrete-time time-shift operator is 。 9. ，determine= 。 10．，Sketch the magnitude spectra, where is DTFS coefficients of x(n). 二、简单计算题（每题6分，共30分） 1．x ( t ) is shown in following figure. Sketch x (2? 2t )u (-t) and write out the brief steps. 2．and are shown in following figure. Suppose . Sketch 。 3．. Determine , the impulse response of this system。 4．Determine a state-variable description for the system depicted in following figure. Write out A、B、C、D。 5．, frequency response of a LTI system, is shown in following figure. Input is . Determine the output y(t)。 三、计算题（40分） 1．（12分）A LTI system is described by following difference equation: input is ，initial conditions are, compute in Z-domain: Transfer function, impulse response ; (2) , and . 2．（14分）A LTI system is described by following differential equation: ， input is ，initial conditions are, compute in S-domain： Transfer function. Is the system stable? , and ; Draw direct form implementation for t