考虑预热情况的液固挤压复合材料模具非稳态温度场-中国有色金属学报.PDFVIP

18 8 2008 8 Vol.18 No.8 The Chinese Journal of Nonferrous Metals Aug. 2008 1004-0609(2008)08-1466-06 ( 710072) TG 37; TB 331 A Nonlinear heat transfer analysis of die during liquid-solid extruding composites considering preheating and its experimental verification QI Le-hua, ZHOU Ji-ming, WANG Yu-shan, SU Li-zheng (School of Mechatronics, Northwestern Polytechnical University, Xi’an 710072) Abstract: The model of non-linear temperature field of the die for liquid-solid extruding composites process is established, which considers the preheating, the heat radiation and the contacting heat transfer between the die and other media. By combining the numerical analysis with experimental testing, the radiation heating and extruding process are simulated using the commercial finite element code MARC. On the basis of researching the heat transfer characteristics, the initial distribution of temperature field of the die and the effect on the shaping process are obtained. Through comparing the simulation results considering the preheating with the stationary temperature field, it concludes that the former approaches to actual forming process. The simulation results are in good agreement with experimental measurements. The research of this paper found the base for designing the technology parameters properly of liquid-solid extrusion composites process. Key words: liquid-solid e