MOTOTRBO_CPS_写频指导.ppt

Instructor Notes: NOTE: Setting the 中继台 Type defines if it belongs to a Single Site or part of an IP站点互联 System. Instructor Notes: NOTE: Plan Radio ID scheme per site and per system in advance to reduce duplicates. Radio IDs must remain unique. Instructor Notes: Topic Four - Reports Instructor Notes: Topic Five – 上机操作. Instructor Notes: Topic One – Introduction Instructor Notes: Refer to MOTOTRBO Online Help for further information. Instructor Notes: Refer to MOTOTRBO Online Help for further information. Instructor Notes: Refer to MOTOTRBO Online Help for further information. Instructor Notes: Refer to MOTOTRBO Online Help for further information. Instructor Notes: NOTE: There is no maximum number of 设定内容 that can be opened at once. This depends of the memory capacity of the computer executing the CPS application. Refer to MOTOTRBO Online Help for further information. Instructor Notes: Refer to MOTOTRBO Online Help for further information. Instructor Notes: Topic Two – 设置和安装 Instructor Notes: Refer to MOTOTRBO Online Help for further information. NOTE: CPS Release not certified for Windows? Vista. Instructor Notes: Topic Three – 设定内容配置 Instructor Notes: NOTE: Priority One Channel 扫描 will follow this sequence: Priority 1, Chnl_1, Priority 1, Chnl_2, Priority 1, Chnl_3. This is true for a list of 模拟信道s with ONLY analog members OR Talkaround 数字信道s in a list of ONLY digital members. Instructor Notes: NOTE: 漫游 is an IP站点互联 system feature. Instructor Notes: NOTE: Explain that TMS and ARS UDP ports are best left at default value unless there is a conflict with existing ports. 扫描 1. 将成员添加至扫描列表： 讲师将演示扫描配置 漫游 1. 将成员添加至漫游列表： 讲师将演示漫游配置 网络设置 讲师将演示网络配置 1. 配置网络设置： MDC紧急报警 讲师将演示MDC紧急报警配置 1. 配置MDC紧急报警设置： 数字紧急报警 讲师将演示数字紧急报警配置 1. 配置数字紧急报警设置： 设定内容功能 – 增容模式紧急报警 讲师将演示增容模式紧急报警配置 1. 配置增容模式紧急报警设置： 预编文本消息 讲师将演示预编文本消息配置 1. 配置预编文本消息： 安全性 讲师将演示安全配置 2. 配置安全密钥： 3. 支持安全功能的信道： 1. 选择安全类别： GPS回复 讲师将演示GPS回复配置 1. 打开GPS回复功能 （选定信道上） : 2. 设置GPS回复选