配电线路故障定位的实用方法.pdfVIP

第 28 卷 第 28 期 中 国 电 机 工 程 学 报 Vol.28 No.28 Oct. 5, 2008 86 2008 年 10 月 5 日 Proceedings of the CSEE ©2008 Chin.Soc.for Elec.Eng. 0258-8013 (2008) 28-0086-05 TM 72 A 470 40 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 配电线路故障定位的实用方法 于盛楠，鲍海，杨以涵 (华北电力大学电气与电子工程学院，北京市 昌平区102206) Practicalization of Fault Location in Distribution Lines YU Sheng-nan, BAO Hai, YANG Yi-han (School of Electrical and Electronic Engineering, North China Electric Power University, Changping District, Beijing 102206, China) [2-5] ABSTRACT: Via analyzing modern methods for fault location SCADA系统的数据，利用各种数学算法 进行寻 in distribution lines, a proper method aiming at single-phase to 址，从而找到故障位置。而对于发生最为频繁的单 ground is put forward to transfer theory to practice, as well as 相接地故障却一直没有较好的解决方式。由于配网 the concept of line structure feature-wave. Two steps are in this 终端负荷的影响，使应用于输电网络故障定位的阻 method. Firstly, high rate waveform picking from the fault line 抗法不再适用。而另一故障定位的经典理论体系行 is recorded utilizing C-type traveling-wave scheme, and by 波法得到关注[6-10] 。行波法是基于故障距离与行波 adaptive filter and differencing the data is processed and fault 从故障点传输到检测点的时间成正比的原理，分为 distance is calculated. Secondly, scanning the peak value of A 、B 、C、D 、E、F 6 型方法。其中只有C型方法， recorded waveform and excluding pseudo-features, so the line structure feature waveform is extracted, thus the fault branch is 即单端注入行波法，可适用于多终端的配电网络。 fixed. The combined two results of fault distance and fault C 型行波法的基本原理是在线路始端注入检测 branch make fault location accurately. After experiments on 信