基于有限元法的铸件振动时效工艺参数研究.PDFVIP

上半月出版 Casting Forging Welding 金属铸锻焊技术 基于有限元法的铸件振动时效工艺参数研究 刘爱敏1, 韩衍昭2 渊1.郑州航空工业管理学院机电工程学院袁河南郑州450015曰2.郑州航空工业管理学院教务处袁河南郑州450015冤 摘 要 振动时效对于消除残余应力非常有效袁但振动时效参数制定较为困难遥以某机床电机座铸件为研究对象袁 尝试以一种全新方法确定振动时效参数遥 利用有限元数值模拟技术确定了铸件铸造残余应力的大小与分布曰 利用 ANSYS 软件的动力学分析功能袁对铸件进行了模态分析和谐响应分析袁根据分析结果得出了振动时效工艺参数遥 该研 究方法和结论对铸造企业确定振动时效工艺参数具有重要的参考价值和借鉴意义遥 关键词 振动时效曰模态分析曰工艺参数曰铸件 中图分类号 TG246 曰TH 162+.1 文献标识码 A 文章编号 Study on Technology Parameters of Vibration Stress Relief About Castings Based on Finite Element Method 1 2 LIU Aimin , HAN Yanzhao (1.Dep artment of Mechanical and Electrical Engineering袁Zhengz hou Institute of A eronautical Industry Management 袁 Zhengz hou 450015, China 曰2. offi ce of teaching aff airs, Zhengz hou Institute of A eronautical Industry Management 袁Zhengz hou 450015, China) Abstract 院The vibration stress relief is very effective to decrease the remnant stress in castings, but the technological parameters are relatively difficult to establish. Taking the casting motor frame as research obj ect, the parameters of vibration stress relief with a new method was tried to determinate. The size and distribution of remnant stress were determined through the numerical simulation technology; the modality analysis and harmonic response analysis were carried on the casting by using the kinetics analysis function of ANSYS. According to the analysis result, some parameters of vibration stress relief were obtained.