TL-4型黄油注油机.docVIP

TZ-5型黄油油机 一、用途Use 本电动液压式黄油油机广泛用于对矿山。冶金起重。运输类的轴承及其它麻擦部位的的注入润滑脂。特别适用于需要相当压力润滑脂肪的机电设备。其特点：本产品工作压力大，工作压力可调整，一次性连续注油量多，使用灵活，操作方便，是目前国内加注润滑脂的领先设备，是目前个类手动脂枪，单件油脂润滑装置和集中润滑装置不可替代的产品。The originally dynamoelectric liquid press type butter notes oil machine to used for to the mineral mountain extensively.The metallurgy rises heavy.Conveyance bearings and other hemp wipe part of of infusing into and lubricating fat.Be applicable to need equal pressure to lubricate adipose machine an electricity an equipments specially.Its characteristics:This product works the pressure is big, work the pressure is whole adjustable, 1 time in a row note amount of oil have another, use vivid, operation convenience, is local to add to note lubrication fat to lead an equipments currently, is a hand to move a fat gun currently, single piece grease lubricate device and concentration lubricate the product that the device cant act for. 二、主要技术参数： 1、润滑脂油港活塞直径100mm，行程280mm。 2、润滑脂油缸活塞行程一次的注油量为2.2L 3 、注油的最大工作压力：6Mpa 4、适用介质：各个牌号钙基，铝基润滑脂 5、电机型号：Y90L—4 1.5千瓦 6、外型尺寸：长1200mm，宽420mm, 高1100mm 7、整机质量：236KgTwo, main technique parameter:1, lubricate the diameter 100 mms of the fat oil harbor piston, route of travel 280 mms.2, the piston route of travel of the lubrication fat oil urn is a time to note oil to measure for the 2.2 Ls3 , The biggest work noted oil pressure:6Mpa4, apply to lie quality:Each card number calcium 基 , the aluminum 基 lubricates a fat5, electrical engineering model number:The Y90 Ls-4s 1.5 kilowatts6, features size:Grow a 1200 mms, the breadth 420 mms, high 1100 mms7, the whole machine quality:236Kg 三、结构说明和工作原理：The structure explains and works principle:本产品结构主要是：机架油泵装置、液压装置、油缸、润滑油脂罐、电气等部分。油缸包括液压油缸和润滑脂油缸，润滑脂油缸是工作的执行元件。液压油缸的活塞和润滑脂的活塞位于同一条轴心线上，并且固定在同一根活塞杆上；从而使润滑脂油缸的活塞随液压油缸的活塞同时往复移动。润滑脂油缸的往复移动完成润滑脂的吸油和排油过程。润滑脂油缸的端盖上固定三通接头，接头的通端分别与润滑脂油缸体、贮油脂器、排油管相联接。工作时，液压装置驱动活塞往复移动，打开位于贮油脂器与润滑脂油缸之间管路上的球阀，润滑脂油缸的活塞向后移动，抽真空，产生负压吸油。关闭球阀，活塞向前移动，通过排油管向润滑部位排油。This product structure mainly BE:The machine oil pumps