两种提高钻床加工精度和效率的配件装置设计-南昌航空大学期刊网.PDFVIP

2005 12 ( ) Dec. , 2005 20 4 Journal of Nanchang Institute of Aeronautical Technology( Natural Science) Vol. 20 No.4 , ( 井冈山学院, 江西 吉安 343000) [ ] ; ; ; [ ] : , , , , , , [ ] TG52 [ ] B [ ] 1001- 4926( 2005) 04- 0062- 03 Two designs of driller parts for enhancing processing precision and efficiency YANG Yuan- mo, XIE Yong- ue ( Jinggang shan I nstitute, Ji. an, Jiangxi 343000) Key words: vertical driller; parts; adjustable bi- axle rack; positioning device of hole gap Abstract: This paper has designed two driller parts for vertical driller : one is adjustable bi- axle rack, which can drill and cut two holes at the same time; and the wheelbase of main axle is adjustable; thus it findswide application and has high efficiency. The other is positioning de- vice of hole gap, which can clamp well- distributed multi- hole parts for drilling and cutting once without drilling- hole mould; thus amplify- ing the range of application and enhancing processing precision on the basis of no damage to the driller. 0 , , , , , , , , , , , , , 1 Z535 , 43. 5~ 151. 5 mm , , , , 1. 1 120 , 26138 , 3 [ ] 2005- 09- 05 [ ] : ( 1961- ) , , , , 4 : 63 ( ) , 2 1. 2 20 (46205) 24 , , 26 (m= 1. 5, Z= 45) , 27 32 5 19 , 13( m= 1. 5, Z= 20) 32 , 13 12, 8( m= 1. 5, Z= 16) , 9 3 , 3 2 , 14 19 15, 16 , 1. 3 3 , ( 2) , 18, 5 32 19 , 3 18 2 2. 1 , 3 , , , , , : , R; , , , , , : , 10, 5 R, R ; , , 2. 2 4 1, 2 5 , 2 3 , 3