一、卫生级气动薄膜调节阀概述-JONENGVALVESCO.,LIMITED.PDFVIP

JONENG VALVES CO.,LIMITED SANITARY ANGLE PNEUMATIC REGULATING CONTROL VALVE Introduction of the sanitary pneumatic regulating valve( control valve) This type pneumatic regulating valve is suitable for different pressure, temperature, flow rate,.. And is widely used in food, pharmacy,cosmetic, purified water, beer, beverage, biotech... And ect industries. This valve is designed with compact construction, assembly easily and the regulating is very precise. Feature and advantage The angle design makes the valve very clean and perfect. The surface is very smooth and clean, without any dead angle places. And the valve is very easily assembly and disassembly. Technical data The valve type: angle type ball body, two way, three way, and you can choose the more way valve body Size: Dn15、25、40、50、65、80、100mm Pressure: PN1.0MPa Connection type: welded, tri-clover type, flanged type, threaded... Material: SS304, SSS316L Gasket: EPDM, PTFE Valve parts Valve stem type: single seat plunger type Flow rate feature: Equal percentage Material: SS304, SS316L Actuator construction type: multi-spring type actuator Gasket: Ethylene propylene rubber clip nylon WWW.JO-NENG.COM TEL:86-577 FAX:86-577 JONENG VALVES CO.,LIMITED Spring range: 1.5～3kg/cm2 （0.15～0.3MPa ） Pneumatic air connection size:M16×1.5 Environment temperature: -30～+70℃ Valve body type: Air open or Air closed type Others: valve positioner, handle, air filter pressure reducing valve, transporting device... Performance details Leackage rate: less than 0.01% of set Kv Return difference: With valve positioner: less than 1% of the total trip Without positioner: less than 3% of total trip Basic tolerance: With valve positioner: less than 1% of the total trip Without positioner: less than 5% of total trip] Regula