基于切削仿真的刀具-工件的参数化三维建模-武汉理工大学学报.PDFVIP

第 29 卷第1 期 武汉理工大学学报 Vo l. 29 No.1 JOURNAL OF WUHAN UNIVERSITY OF TEæNOLOGY Jan. 2007 2007 年 1 月 基于切削仿真的刀具-工件的参数化三维建模 盛精1 ， 2 死伟政2 耿文特1 (1.湖北汽车工业学院机械系，十堪 442002;2 西北工业大学机电学院，西安 710072) 摘 要: 针对金属斜角切削过程的数值模拟分析，为方便和快捷地对刀具工件系统进行三维建摸，介绍了刀具-工件 的参数化几何建模的关键技术及其过程。通过建立刀具、工件的参数化模型并分别选用了合适的造型方式，应用数据库 技术，采用 C十+ Builder 软件完成了接口设计;在给定刀具的结构尺寸、几何角度和工件的几何尺寸以及刀具与工件的 相对位置后，即可生成三维建模的过程文件，并在 Marc 软件环境中完成刀具工件的三维几何建模。这样，为进一步斜 角切削过程的数值模拟创造了条件。 关键词: 斜角切削; 数千直模拟; 参数化建模 中图分类号 TP 39 1. 9 文献标志码 A 文章编号: 1671-4431 (2007)01-0065-04 The Parametric 3D Modeling of the Tool and the 矶Torkpiece Based on Simulation of Cutting Process SHENG Jing l, 2 , YUAN Wei-zheng2 , GENG Wen-xuan 1 (1 .M巳chanical Department , Hubei Automotive Industrial Institute , Shiyan 442002 ,China;2. Sch∞1 of Mechanical and Electrical , Northwestem Polytechnical University , Xi an 710072 ,China) Abstract: Aiming at the numerical simulation of the metal oblique cutting proc臼S ， 50 as to make 3D modeling convenient and rapid , modeling t巳chnique and procedure was introduced in the paper. Firstly the model of the t∞1 and workpi巳ce were giv en , and mod巳ling styles was al50 chosen. Then the interface was finished by using C 十+ Builder , with the help of database technique. After giving the parameters of the structure and geometry of the tool while giving the workpiece dimension and rela- tive position betw巳en them , procedure file was made and 3D modeling could be done in M缸c environment. so it provided the basis for numerical simulation on metal oblique cutting proc臼s. Key words: obliqu