年产15000万吨镁铬砖生产车间设计.docVIP

年产15000万吨镁铬砖生产车间设计 摘 要MGe-20和MGe-18，其中MGe-20的产量为7000吨，MGe-18的产量为8000吨。本设计生产线叙述了MGe-20和MGe-18耐火材料的使用条件及其生产工艺理论基础、辅助原料的要求、加工处理方法、产品的生产工艺流程、物料平衡计算结果、生产设备的选型计算以及生产技术检查系统的说明。 关键词：耐火材料,镁铬砖,车间,设计 15000 tons magnesia-chrome brick production plant design Abstract Magnesia-chrome brick is alkaline refractory products to periclase and magnesium spinel main phase, in an oxidizing atmosphere at 1600-1800 ℃ firing, including direct binding magnesia chrome brick, magnesia chrome brick semi-combined, combined with fused magnesia-chrome brick as well as ordinary magnesia-chrome brick. Which combined with fused magnesia-chrome brick, using some or all of the fused sand (synthetic fused sand) as raw materials, fine ingredients, pressure molding, ultra-high-temperature calcination, particle degree of integration is good, high strength, volume stability. ???? The design of the main products are combined with fused magnesia-chrome brick MGe-20 and MGe-18, which MGe-20 production was 7000 tons, MGe-18 production was 8,000 tons. The design of production lines described MGe-20 and MGe-18 refractory conditions of use and its production process theoretical basis, the requirements of auxiliary materials, processing methods, the production process, material balance calculations, calculation of production equipment selection as well as a description of the production inspection system technology. Keywords: Refractories,Magnesia-chrome brick,The workshop,Design 目 录 摘 要 I Abstract II 目录 III 1 绪论 5 1.1电熔再结合镁铬砖的发展历史 5 1.2电熔再结合镁铬砖的应用 5 2 工艺部分 6 2.1工艺的理论基础 6 2.1.1与MgO-Cr2O3系耐火材料有关的相平衡 6 2.1.2原料的技术指标 9 2.1.3影响电熔再结合镁铬砖性能的主要因素 9 2.1.3.1铬矿的选择 9 2.1.3.2 添加剂对Mg-Cr砖的性能的影响 10 2.1.4 破粉碎 10 2.1.5 筛分 10 2.1.6 物料的贮存 11 2.1.7 配料 11 2.1.8 混练 12 2.1.9 成型 12 2.1.10干燥 13 2.1.11 烧成 14 2.1.12 成品仓库 15 2.1.13 除尘 15 2.2工艺流程简述 16 2.3工艺参数 16 2.4物料平衡计算 17 2.5生产设备 21 2.6仓库设施 22 3 生产技术检查系统说明 23 3.1检查内容 23 3.2检查方法 23 3.3检查制度 23 4 车间安装，检修与维护措施 24 5 生产车间安全措施 24 6 本设计主要特点 25 致谢 26 参考文献 27 附录 28 计算： 28 砖种 32 原料仓库的选择计算： 36