12864lcd驱动程序.docVIP

12864lcd驱动程序 #includestdio.h #includemath.h #includeintrins.h #includeabsacc.h #includestring.h #includeLCD_12864.h sbit reset=P3^3; uchar code lcd_width=16;//款128像素，128/8=16字节 uchar code lcd_height=64;//高64像素 uchar gcurgow,gcurcol;//图像当前行，列存储，行高16点，列宽8点 uchar tcurrow,tcurcol;//文本当前行，列存储，行高8点，列宽8点 uchar showmodesw;//当前显示模式 uchar txthome, grhome; //LCD控制相关函数 uchar status_bit_01();//状态位stal,sta0判断（读/写指令和读/写数据） uchar status_bit_3();//状态位st3判断（数据自动写状态） uchar lcd_write_command(uchar cmd);//写无参数的指令 uchar lcd_write_command_p1(uchar cmd,uchar para1);//写单参数的指令 uchar lcd_write_command_p2(uchar cmd,uchar para1,uchar para2);//写双参数的指令 uchar lcd_write__data(uchar dat);//写数据 void cls();//清屏 uchar lcd_initialise();//lcd初始化 void set_lcd_pos(uchar row,uchar col);//设置当前地址 //状态位STA1,STA0判断（读/写指令和读/写数据） uchar status_bit_01() { uchar i; for(i=5;i0;i--) { if((LCMCW0x03)==0x03) break; } return i;//错误时返回0 } //状态位st3判断（数据自动写状态） uchar status_bit_3() { uchar i; for(i=5;i0;i--) { if((LCMCW0X08)==0X08) break; } return i;//错误时返回0 } //写双参数的指令 uchar lcd_write_command_p2(uchar cmd,uchar paral,uchar para2) { if(status_bit_01()==0) return 1; LCMDW =para1; if(status_bit_01()==0) return 2; LCMDW =para2; if(status_bit_01()==0) return 3; LCMCW =cmd; return 0;//成功是返回0 } //写单参数的指令 uchar lcd_write_command_p1(uchar cmd,uchar para1) { if(status_bit_01()==0) return 1; LCMDW =para1; if(status_bit_01()==0) return 2; LCMCW =cmd; return 0;//成功是返回0 } //写无参数的指令 uchar lcd_write_command(uchar cmd) { if(status_bit_01()==0) return 1; LCMCW =cmd; return 0;//成功是返回0 } //写数据 uchar lcd_write_data(uchar dat) { if(status_bit_3()==0) return 1; LCMDW =dat; return 0;//成功是返回0 } //设置当前地址 void set_lcd_pos(uchar row,uchar col) { uint pos; pos=row*lcd_windth+col; lcd_write_command_p2(LC_ADD_POS,pos%256,pos/256); gcurrow=row; gcurcol=col; } //清屏 void cls() { uint i; lcd_write_command_p2(LC_ADD_POS,0X00,0x00);//设置地址指针 lcd_write_command(LC_AUT_WR);//自动写 for(i=0;i0x2000;i++) { status_bi