电气工程与的自动化.docVIP

电气工程与自动化毕业论文 题 目 PLC控制的自动灌装机系统的设计 系 （院） 自动化系 专 业 电气工程与自动化 PLC控制的自动灌装机系统的设计 摘 要 近年来，社会的发展和进步对各行各业提出了越来越高的要求。机械化加工企业为了提高生产效率和市场竞争力，采用了机械化流水线作业的生产方式，对不同的产品分别组成了自动流水线。产品不断地更新换代，也同时要求相应的控制系统随之改，提高产品生产的效率。在这种情况下，硬连接方式的继电接触式控制系统就不能满足经常更新的要求了。这是因为，一是成本高，二是周期长。在早期还出现过矩阵式顺序控制器和晶体管逻辑控制系统，由于这些装置体积大，功能少，本身存在很多不足，虽然在能够提高控制系统的通用性和灵活性，但均未得到广泛应该。 PLC可编程序控制器具有结构简单、编程方便、可靠性高等优点，已广泛用于工业过程和位置的自动控制中。据统计，可编程控制器是工业自动化装置中应用最多的一种设备。专家认为，可编程控制器将成为今后工业控制的主要手段和重要的基础设备之一。由于PLC具有对使用环境适应性强的特性，同时其内部定时器资源十分丰富，Filling Machine Bssed on the PLC System Design of the Automatic Filling Machine Abstract In recent years, social development and progress take higher and higher requirements for the various trades.Mechanical processing enterprises takes the introduction of mechanized production line operations and the products of different compositions of the auto assembly line inorder to improve production efficiency and market competitiveness.Products are continuously upgrading which also required along the corresponding control system change to improve production efficiency. In this case, the hard-wired way of relay contact control system can not meet the requirements of a regular update. This is because, first, high costs, and second, a long cycle. Also appeared sequence of matrix transistor logic controllers and control systems in the early, as these devices are bulky, feature little in itself has many deficiencies, although the control system can improve the versatility and flexibility but were not widely should be. The?programmable?preface?in?PLC?controller?is?a?kind?of?new?industry?methodsofcontiol?the?device,it?regard?microprocessor?as?the?foundation,?synthesizing?the?calculator?technique,?automatic?control?technique?to?develop?with?the?communication?technique?.It?has?the?construction?simple,?the?plait?distance?is?convenient,?high?etc.?in?dependable?advantage,?already?extensive?used?for?the?industry?process?with?the?automatic?control?of?the?position?inside. According?to?the?covariance,