印刷生产工艺课程设计.docxVIP

课程设计（论文）题目：印刷生产工艺课程设计子题：德芙巧克力塑料薄膜软包装的印刷生产工艺设计专业：印刷工程指导教师：学生姓名：班级学号：印刷2013年6月30日摘要本次课程设计是通过对德芙巧克力塑料薄膜软包装的分析，结合有关印刷专业课的内容及查阅可能的资料，制定出该产品印刷生产的工艺流程。设计过程以生产工序为主线，以课本知识为主，结合查阅资料和个人思考，完成了巧克力软包装印刷生产过程中有关材料选择、凹版印刷工艺制定、薄膜的复合及切分等工艺流程的设计。本包装结构为典型PET/AL/NY/PE复合膜，承印材料为外层的聚酯薄膜（PET），采用FR300无轴传动机组式凹版印刷机进行七色里印。印刷完成后的PET在与真空镀铝的尼龙薄膜（NY）、聚乙烯塑料薄膜（PE）经过MDL200三层干法复合机复合后，由FSD分切机切分后复卷为小卷完成整个制作过程。关键词：巧克力软包装；凹版印刷；镀铝复合膜；干式复合；AbstracTThisdesign is based on the analysis of dove chocolate plastic flexible packaging, textbook knowledge combined with the course content and look up for any information that may be, make the product printing production process. Design process in the production process as the main line, with textbook knowledge is given priority to, combined with access to information and personal thinking, completed the chocolate in the production of flexible packaging printing on material selection, gravure printing process, the thin film composite, segmentation process flow design, etc. The packaging structure for typical PET/AL/NY/PE composite membrane, substrates for the outer layer of the polyester film (PET), gravure printing machine adopt FR300 shaftless driving unit type for seven colors in the print. Printing the finished PET nylon with vacuum aluminum plating film (NY), polyethylene (PE) plastic film after MDL200 three layer dry composite machine composite, the FSD slitting machine segmentation rewinding for small volume after finish the whole production process. key words: flexible packaging of Chocolate; viscosity printing; Aluminized composite membrane; Dry lamination;目录第一章整体方案规划1第二章印前工艺设计12.1 原稿处理与分色12.1.1 图文处理22.1.2 拼版22.2制版22.2.1 制版参数确定22.2.2 制版要求32.2.3 印刷色序的确定32.2.4 打样4第三章印刷过程设计43.1材料的选择43.1.1 外层膜材料的选择43.1.2 中间层材料的选择43.1.3内层材料的选择53.3.4 油墨选择53.2 表面处理53.5 上机印刷63.5.1 所用印刷机介绍63.5.2 装版73.5.3 压印滚筒调整73.5.4 刮墨刀的安装与调节83.5.5放卷装置调节83.5.6纸带横向规矩调偏装置调节83.5.7 开机试印83.5.8 张力设定83.5.9 印刷压力的设定93.5.10 套准调节93.5.11 干燥装置与冷却装置的设定93.5.12正式印刷中的调整103.5.13 印刷车间温、湿度的控制10第四章印后加工设计104.1 干式复合工艺介绍104.2