51单片机时钟闹钟程序.docVIP

51单片机时钟闹钟程序 #include reg52.h #define uchar unsigned char #define uint unsigned int sbit dula=P2^6; sbit wela=P2^7; sbit led1=P1^0; //sbit k1=P3^4; //sbit k2=P3^5; //sbit k3=P3^6; //sbit k4=P3^7; uchar code table[]={ 0x3f,0x06,0x5b,0x4f, 0x66,0x6d,0x7d,0x07, 0x7f,0x6f,0x77,0x7c, 0x39,0x5e,0x79,0x71}; void delayms(uint); //void duli_key(); void juzhen_key(); void naozhong(); void xianshi(uchar,uchar,uchar,uchar,uchar,uchar); uchar num1,miao,fen,shi,w1,w2,w3,w4,w5,w6; void main() { TMOD=0x01; TH0=(65536-45872)/256; TL0=(65536-45872)%256; EA=1; ET0=1; TR0=1; while(1) { juzhen_key(); naozhong(); xianshi(w1,w2,w3,w4,w5,w6); //duli_key(); } } void naozhong() { if(fen==45||fen==0) if(miao=0miao10) if(shi=8shi=1|2|shi=14shi=17||shi=19shi=21||shi==0) led1=0; else led1=1; // if(miao=10miao60) // led1=1; // if(fen!=45fen!=0) // led1=1; // if(shi0shi8||shi12shi14||shi17shi19||shi21shi24) // led1=1; } void xianshi(uchar w1,uchar w2,uchar w3,uchar w4,uchar w5,uchar w6) { dula=1; P0=table[w1]; dula=0; P0=0xff; wela=1; P0=0xfe; wela=0; delayms(1); dula=1; P0=table[w2]; dula=0; P0=0xff; wela=1; P0=0xfd; wela=0; delayms(1); dula=1; P0=table[w3]; dula=0; P0=0xff; wela=1; P0=0xfb; wela=0; delayms(1); dula=1; P0=table[w4]; dula=0; P0=0xff; wela=1; P0=0xf7; wela=0; delayms(1); dula=1; P0=table[w5]; dula=0; P0=0xff; wela=1; P0=0xef; wela=0; delayms(1); dula=1; P0=table[w6]; dula=0; P0=0xff; wela=1; P0=0xdf; wela=0; delayms(1); } void delayms(uint xms) { uint i,j; for(i=xms;i0;i--) for(j=110;j0;j--); } void juzhen_key() { uchar temp,k; P3=0xfe; temp=P3; temp=temp0xf0; if(temp!=0xf0) { delayms(10); temp=P3; temp=temp0xf0; if(temp!=0xf0) { temp=P3; switch(temp) { case 0xee: k=1; break; case 0xde: k=2; break; case 0xbe: k=3; bre