51编的计时器-温度计.docVIP

51编的计时器-温度计 #include reg51.h unsigned int flagg; //正负标志 unsigned int tem;// 温度值 unsigned int keyy; //为温度服务 sbit DQ=P3^0; //为温度服务 unsigned int flag,flag0,flag1,flag2,flag3,flag4;// 时钟进位标志 unsigned int flag00,flag11,flag22,flag33,flag44;//秒表进位标志 unsigned int count0,count1,count2; //1s=count0(20)*50ms ,0.5s=count1(50)*10ms unsigned int flag_scan0,flag_scan1; //flag_scan0为调分钟标志，flag_scan1为调时钟标志 unsigned int sign0,sign1,sign2,sign3,sign4,sign5,sign6;//为调时间服务 ,sign6为温度计标志 unsigned int key,key0,key1,key2;key3; //key为按下P1.0即调时间，key0为按下P1.1即秒表,key1为按P1.2,key2,key3也为按P1.2 为温度服务 unsigned int x;//为闪烁服务 unsigned int t,y,z; //为调时间服务 unsigned int a,b,c,d,e,f,g;//为秒表服务 unsigned int aa; unsigned char code Select[]={0xFE,0xFD,0xFB,0xF7,0xEF,0xDF}; //led灯选通信号 unsigned char code LED_CODES[]= { 0X3F,0X06,0X5B,0X4F,0X66,//0-4 //八段码 0X6D,0X7D,0X07,0X7F,0X6F, //5-9 0X77,0X7C,0X39,0X5E,0X79,0X71,//A,b,C,d,E,F 0X80//小数点 }; unsigned char data led_temp[]={0x00,0x00,0x00,0x00,0x00,0x00};//时钟秒表当前显示数据 unsigned char data led_temp_1[]={0x00,0x00,0x00,0x00,0x00,0x00};//温度当前显示数据 unsigned char data temp[]={0x00,0x00,0x00,0x00,0x00,0x00}; /******************时钟调节******************/ void scan(void) //调时函数 { while(P1==0X0FEsign4==0){TR0=0;key=1;}//键没松开则等待 if(key==1) { sign3=1;sign5=1; //sign3作用是使在调时间时，按P1.1不会转成秒表 TR1=1; if(y==0) //调分钟 { key=0;y=1; flag_scan0=1; flag_scan1=0; } } if(P1==0X0FDsign1==1flag_scan0==1)//分钟加一操作，sign1是定时0.55ms标志使按键延时0.55毫秒有效 { sign1=0; led_temp[2]=led_temp[2]+1; if(led_temp[2]==10){led_temp[2]=0;sign0=1;} if(sign0==1) { sign0=0; led_temp[3]=led_temp[3]+1; if(led_temp[3]==6){led_temp[3]=0;} } } if(P1==0X0FBsign1==1flag_scan0==1) //分钟减一操作，sign1是定时0.55ms标志使按键延时0.55毫秒有效 { sign1=0; if(led_temp[2]==0){ led_temp[2]=10;sign0=1;} led_te