时钟可调.docVIP

时钟可调 #includeAT89X51.H #define uchar unsigned char #define uint unsigned int #define LedDisp_Port P0 sbit LedDisp_com1=P2^0; sbit LedDisp_com2=P2^1; sbit LedDisp_com3=P2^2; sbit LedDisp_com4=P2^3; sbit LedDisp_dp=P0^7; unsigned char t0IntCnt=0x00; //定义变量 unsigned char second,minute,hour; void display(); //声明函数 void key_detect(); void delay_ms(uchar); void system_init(); sbit key_minute=P3^6; //端口定义 sbit key_second=P3^7; //sbit key_clr=P3^5; sbit KEY=P3^4; sbit KEY1=P3^5; unsigned char code tab[10]= { 0xC0,/*0*/ 0xF9,/*1*/ 0xA4,/*2*/ 0xB0,/*3*/ 0x99,/*4*/ 0x92,/*5*/ 0x82,/*6*/ 0xF8,/*7*/ 0x80,/*8*/ 0x90,/*9*/ }; /*-------------------------------- 主程序 --------------------------------*/ void main() { P1=0xfe; system_init(); while(1) { display(); key_detect(); } } /*-------------------------------- 初始化程序 --------------------------------*/ void system_init() { TMOD=0x01; TR0=1; TH0=(65536-50000)/256; TL0=(65536-50000)%256; EA=1; ET0=1; t0IntCnt=0x00; second=0x00; minute=0x00; hour=0x00; } /*-------------------------------- 定时器0中断程序 --------------------------------*/ void timer0_ISR() interrupt 1 { TH0=(65536-50000)/256; TL0=(65536-50000)%256; t0IntCnt++; if(t0IntCnt==20) { t0IntCnt=0x00; P1=P11; if(P1==0x00) { P1=0xfe; P1=P11; } if(P1==0x00) { P1=0xef; P1=P11; } second++; if(second==60) { second=0x00; minute++; if(minute==60) { minute=0x00; hour++; if(hour==24) { hour=0x00; } } } } } /*-------------------------------- 毫秒延时程序 --------------------------------*/ void delay_ms(uchar no) { uchar i,j; for(i=0;ino;i++) { for(j=0;j164;j++); for(j=0;j164;j++); } } /*----------------------