基于光纤交互式远方自投装置的研发与应用.DOC

基于光纤通信交互式远方自投装置的研发与应用 卜明新1，武晋文2，吴孔松3 ，黄文鹰3 （1、河北邯郸供电公司，河北 邯郸 056002，2、邯郸市德普电力自动化设备有限公司，河北 邯郸 056002，3、上海安科瑞电气股份有限公司，上海 嘉定 201801） 摘要： and application of the interactive remote reserve power supply auto-switching device based on the optical-fiber communication Bu mingxin1,Wu jinwen2,Wu kongsong3 (1 Hebei Handan Power Supply Company, Hebei Handan 056002,2, Handan City Depu Electric Power Automation Equipment Co., Ltd. Hebei Handan 056002,3 Shanghai acrel Electric Co., Ltd,shanghai jiading 201801) Abstract: 110kV power grid for the online contact one end of the blackout, the original substation devices prepared from the vote since the vote can not achieve the distance function, leading to some of 110kV substation and one end of the 220kV substation site-wide blackout. Study on a use of existing fiber-optic communication channel information transmission operation, fault information and jump Reclosing command standby power mode of the program since the vote. Prepared through the transformation of the original cast from the device, increasing the number of voting logic program, the installation of fiber optic communications modules, implementation of the interface with the fiber-optic network. Handan City in Hebei Province by the 110kV grid in the application and implementation, good implementation of the tandem distance standby power grid since the vote. Key words: 110kV power grid The distance from the vote Fiber Since the distance preparing to vote 0、引言 目前，国内电网部分110kV变电站没有真正实现双电源供电。即不是直接从220kV变电站引来，而是多座变电站串接在两座220kV变电站中间，简称为“手拉手”式闭环连线开环运行结构。正常时，两端电源供电，中间的两座变电站间联络断路器断开。如下图1结构。K1~K4，K6~K10闭合，K5断开，假设左侧220kV变电站停电，变电站1内的备自投无法控制K5，导致变电站1，左侧220kV变电站全站停电。如何解决这一问题，即检测、判断故障，通过何种方式传递、变换站间信息，以便隔离故障，提高供电可靠性，一直是一个难题。笔者针对这个问题，联合邯郸市德普电力自动化设备有限公司，上海安科瑞电气有限公司研制了“基于光纤通信交互式远方自投装置”，很好的解决了这一问题。 图1、“手拉手”式电网结构 Fig 1.Hand in Hand Power Network Structure 1、高压电网装设该装置的背景和意义 近阶段，河北电网部分变电站采用“手拉手”式结构，不能完全实现真正意义的双电源供电，当系统发生故障时，经常造成220kV，110kV变电站全站失压，造成负荷损失，极大地影响了我省部分地区的供电可靠性，但由于电网发展资金的限制，不可能在短时间内通