万向节滑动叉论文.docVIP

编号 南京航空航天大学金城学院 毕业设计 题 目 基于UG的万向节滑动叉零件的工艺规程及工装设计 学生姓名 张奔 学 号 2108011135 系 部 机电工程系 专 业 机械工程及自动化 班 级 指导教师 杨慧 讲师 二〇一二年月 南京航空航天大学金城学院 本科毕业设计（论文）诚信承诺书 本人郑重声明：所呈交的毕业设计（论文）（题目：基于UG的万向节滑动叉零件的工艺规程及工装设计）是本人在导师的指导下独立进行研究所取得的成果。尽本人所知，除了毕业设计（论文）中特别加以标注引用的内容外，本毕业设计（论文）不包含任何其他个人或集体已经发表或撰写的成果作品。 作者签名： 年 月 日 （学号）： 基于UG的万向节滑动叉零件的工艺规程及工装设计 摘要 万向节滑动叉主要在两个不同的心轴或有一定夹角的轴间传递动力，万向节叉可以简化万向传动装置的结构，因此对于万向节叉的研究具有深远的意义。 的主要，是对我们的全面考察也是对专业软件应用熟练程度的一次考验， 关键词：万向节，滑动叉，工艺，专用夹具  The Process Procedures and Tooling Design of Universal Joint Sliding Fork Based on UG Abstract Universal joint sliding fork is located in the top of the transmission shaft. The main use of it is transferring power between the two different heart shaft or the shaft that is having certain angle. The use of universal joint sliding fork may simplify the structure of universal transmission device, so it is important to make a research of it. The main purpose of research is improving the processing efficiency by making some process procedures. Due to the complexity of its structure, it needs the assistant of special jig during the processing process. So we need to design two special jigs that is used during the processing process. In the process of designing, we need to use some professional drawing software, such as UG or CAD. So the graduation design is not only the test for our professional knowledge, but also the investigation for our use of some software. Through the professional knowledge work out relevant process planning and design related fixture. Then we need to draw the fixture assembly drawings and explosion figure with UG, and using CAD modify 2d figure. Generally, the graduation design is an actual combat maneuvers for our abilities. It is important for us about the development of our future. Key words: gimbal ; sliding ;forks ;craft ;special ; fixture  目 录 摘 要 i Abstract ii 第一章 引 言 1 1.1 概述 1 1.2课题研究的方法和意义 1 第二章 机械加工工艺规程设计 2 2.1概述 2 2.1.1 工艺规程的作用 2 2.1.2 工艺规程的设