立式水轮发电机通风系统及转子温度场研讨.pdfVIP

中国工程热物理学会 传热传质学 学术会议论文 编号：083069 立式水轮发电机通风系统及转子温度场研究 1 2 2 2 徐旭 ，李桃 ，陈立卫 ，刘长路 1 2 中国计量学院计量测试工程学院，310018； 水利部产品质量标准研究所，310012； 联系电话：0571E-mail:xuxu@cjlu.edu.cn 摘要：本文采用有限元软件对某梯级电站立式水轮发电机通风系统进行数值模拟，获得气流速度分布。 在此基础上，计算了转子磁极各表面的散热系数，并结合电机各部分热损耗,得到了转子磁极的温度分 布。研究表明: 采用CFD 能较准确地模拟发电机的通风系统流场,为电机通风系统设计和优化提供有效 的依据；转子磁轭端部加装弧形风扇后产生的冷却流量满足实际运行过程中电机冷却的需要；转子温 度在其设计的绝缘容许温度范围内，且有足够裕度，可长期安全运行。 关键词：立式水轮发电机，通风系统，转子温度场 Research on ventilation and stator temperature field of Vertical Hydro Power generator 1 2 2 2 Xu Xu , Li Tao , Chen Li-wei , Liu Chang-lu 1 College of Metrology and Measurement Engineering, China Jiliang University, Hanghzou 310018, China; 2The Research Station of Manufacture Quality Criterion, Water Conservancy, Hangzhou, 3100 12, P.R.China Abstract: The flow field of ventilation system for Vertical Hydro Power generator was simulated by applying CFD software. Based on it, coefficients of heat transfer were obtained, and then with the losses of different parts, the temperature field distributions of stator were calculated. The research indicates that the ventilation system of flow-bulb hydro-generator could be simulated accurately by CFD, which provides references for its design and optimization. After adding arc fun on the end of rotor magnetic yoke, the flow brought by the revolution of rotor is satisfied the cooling of generator. The rotor temperature is in the range of the permissible temperature of designed insulation and has enough tolerance. Key words: vertical hydr