基于LonWorks的流量过程控制研究.pdfVIP

th Proceedings of the 25 Chinese Control Conference 7-11 August, 2006, Harbin, Heilongjiang 基于LonWorks的流量过程控制 王经卓，乔国垒 淮海工学院 电子工程系，连云港 222005 E-mail: wjz@hhit.edu.cn 摘 要: LONWORKS网络控制技术是近年来迅速发展起来的现场总线控制技术，在工业自动化领域得到广泛应用。 提出了采用LONWORKS技术的流量过程控制系统的基本方案，讨论了流量过程控制系统的结构，采用PID控制理 论，利用LonMaker工具组建了流量控制网络。电磁流量计采集的流量信号通过AI节点传送给LonWorks网络，由 PID控制模块进行控制，其输出通过AO模块控制电动调节阀。最后，以VB为开发工具，调用LNS API函数，对流 量控制数据进行了采集，从而实现对流量的监测和控制。 关键词: LONWORKS,过程控制, 电磁流量计, 电动调节阀, PID Flow Rate Process Control Based on LonWorks Jingzhuo Wang, Guolei Qiao Department of Electronic Engineering, Huaihai Institute of Technology, Llianyungang 222005, China E-mail: wjz@hhit.edu.cn Abstract: The LonWorks network control technology, one of the field bus technologies developed in recent years, has been widely used in industrial automatic areas. The scheme of the flow process control system based on LonWorks technology was put forward. The structure of flow process control system was discussed. The flow control network was built by adopting LonMaker tool based on the PID control theory. The signal of flow rate acquired by the electromagnetic flow meter is sent to LonWorks network by an AI LonPoint. Its output can be used to control the electricity-driven adjusting valve. Finally, the data for controlling flow rate are acquired through calling LNS API functions with the program developed by VB. Therefore, it made the monitor and control of the flow rate come true. Key Words: LonWorks, process control, electromagnetic flow meter, electricity-driven adjusting valve, PID 现场总线系统正逐渐成为过程控制领域的主流。其