Moldflow_IMOLD技术在注塑模设计中的应用_罗广思.pdfVIP

2009. No. 2 51 : 1001-4934(2009) 02-0051-04 Moldflow/ IMOLD 罗广思, 柏铁山 ( , 213164) : 介绍了基于Moldflow/ IM OLD 技术的注塑模具设计流程以一种手机外壳 为例, 用Moldflow 软件进行注塑模拟分析, 获取最佳结果借助IMOLD 软件进行 模具结构设计, 将二者结合成一个完整的注塑模具设计系统, 能极大提高塑料制品的 研发效率 : 注塑模; 设计流程; Moldflow ; IM OLD : T P391.72 : B Abstract: T e design process of injection mold using Moldflow/ IMOLD tec nology was in- troduced. In order to obtain t e best design result a cell p one s ell w as taken as an example and its injection simulation analysis was conducted by Moldf low sof tw are and t e injection mold structure was designed using IMOL D software. T roug combining Moldf low and IMOL D, a design system was f ormed, w ic could greatly improve t e design eff iciency of t e plastic products. Keywords: injection mold; design process; Moldflow; IMOL D 0 CAE , [ 2] Moldflow : , ( 1) Moldflow Plastics Advisers( [ 1] , M PA) : , Moldflow / IMOLD , , MPA , , , , , , , ( 2) Moldflow Plastics Insig t ( , MPI) : , , 1 Moldflow , , Moldflow : 2008- 11- 19 : ( 1961-) , , 52 Die and Mould Tec nology No2. 2009 , , [ 4-6] ( 3) Moldflow Plastics Xpert ( , MPX) : , , , 2